Introduction

Based on the AMD Opteron™ 64-bit architecture, the Thunder K8S Pro (S2882) is a powerful and stable server platform for today's demanding performance requirements. Thunder K8S Pro (S2882) is a specially designed platform with competitive features such as eight DIMM slots for 16GB of excellent memory performance, IPMI compliant server management support, and Gigabit Ethernet/Fast Ethernet LAN ports for powerful broadband connectivity. The Thunder K8S Pro (S2882) is ideal choice for 1U and 2U server environments.

Models

Specifications

Processor  • Dual µPGA 940-pin ZIF sockets  • Supports up to two AMD Opteron™ processors  • Two onboard 3-phase VRMs  • 128-bit DDR dual-channel memory controller     (integrated in CPU) Chipset  • AMD-8131™ HyperTransport™ PCI-X Tunnel  • AMD-8111™ HyperTransport™ I/O Hub  • Winbond™ W83627HF Super I/O ASIC  • Analog Devices ADM1027 Hardware Monitoring IC Memory  • 128-bit DDR memory bus  • Eight 184-pin 2.5-Volt DDR DIMM sockets     - each CPU controls four  • Supports up to 16GB of Registered DDR  • Supports ECC type memory modules  • Supports PC3200 / 2700 / 2100 / 1600 DDR Expansion Slots (Total of five usable slots)  • Two independent PCI-X buses  • PCI-X bridge A supports 64-bit 133/100/66/33      MHz with two 3.3V PCI-X slots      (one with ZCR support - option)  • PCI-X bridge B supports 64-bit 133/100/66/33      MHz with two 3.3V PCI-X slots  • One legacy 32-bit 33 MHz (5V) PCI  slot Back Panel I/O Ports  • Stacked PS/2 mouse and keyboard ports  • Stacked two USB v1.1 ports + 1 RJ45 10/100      Base-T port w/ activity LED  • Two 9-pin UART serial ports  • One 15-pin VGA port  • Two RJ45 10/100/1000 Base-T ports with      activity LED Integrated I/O  • One floppy connector supports up to two drives  • One 9-pin serial ports connector  • One 25-pin parallel port connector  • Four USB v1.1 ports  • Three front panel LAN activity LED connectors System Management  • Seven 3-pin fan headers with tachometer     monitoring  • Five fan headers with (PWM) speed control  • One 2-pin Chassis Intrusion header  • Temperature, voltage and fan monitoring Integrated Enhanced IDE Controller  • Dual IDE channels supports up to four EIDE     devices  • Supports for UDMA 33/66/100/133 IDE drives     and ATAPI compliant devices

Integrated PCI Graphics  • ATI RAGE™ XL PCI graphics controller  • 8MB Frame Buffer of video memory Integrated LAN Controllers  • Broadcom BCM5704C dual-channel GbE     - Two RJ-45 LAN connectors with LEDs     - Connected to PCI-X Bridge A  • Intel 82551QM 10/100 LOM     - Operating at 32-bit/33MHz PCI bus Integrated SATA Controller  • Silicon Image Sil3114 SATA RAID Accelerator  • Supports S-ATA 1.0 specification  • Supports 4 channel SATA port for up to four     SATA devices  • Supports RAID 0, 1, 0+1  • Connected to legacy 32-bit 33MHz PCI bus Integrated Dual Channel SCSI (option) • Adaptec AIC-7902W Ultra 320     SCSI controller  • Connects to PCI-X Bridge A  • Adaptec® and Intel® zero-channel RAID     technology support Intelligent Platform Management Interface Header  • TYAN Server Management Daughter card      (optional) supports features listed below via     IPMI header  • QLogic™ Zircon Baseboard Management     Controller (BMC)  • Tailored for IPMI highest 1.5 Spec.  • Supports KCS and BT styles  • Flexible Windows/Linux Management Solution  • Supports RMCP and SNMP protocols  • Supports ASF standard and EMP  • I2C serial multi-master controllers and UARTs  • Build-in IPMB connector  • Remote power on/off and reset support     (IPMI-over-LAN) BIOS  • AMI® BIOS 8.0 on 4Mbit LPC Flash ROM  • Supports APM 1.2 & ACPI 1.0  • Power Management S1, S4, and S5 support Form Factor  • Extended ATX footprint     (13" x 12", 304.8x330.2mm)  • EPS12V (24pin + 8pin) power connectors Regulatory  • FCC Class B (Declaration of Conformity)  • CE (Declaration of Conformity).