| SYSTEM
OVERVIEW |
|
System
overview:
|
Smart
Pro line interactive 2U expandable rack /
tower UPS with integrated switched PDU
|
|
Voltage
compatibility:
|
120V
AC
|
|
Frequency
compatibility:
|
60
Hz
|
| OUTPUT |
|
Output
volt amp capacity (VA):
|
2600
|
|
Output
watt capacity (watts):
|
2100
|
|
Output
nominal voltage:
|
120V
AC
|
|
Output
voltage regulation:
|
LINE
MODE: Sine wave line voltage 120V (-18% /
+8%), BATTERY MODE: Sine wave output 120V
+/-5%
|
|
Output
frequency regulation:
|
LINE
MODE: Passes line frequency of 60Hz +/-10%
BATTERY MODE: Inverter output regulated to
60Hz +/-0.5Hz
|
|
Outlet
quantity / type:
|
4
NEMA 5-15R, 4 NEMA 5-15/20R and 1 NEMA L5-20R
|
|
Customized
load management receptacles:
|
3
individually controllable outlets support
load shedding and remote reboot on demand
of locked network devices. Controllable via
PowerAlert software to switch off optional
loads, like monitors, to increase available
runtime for servers and other critical devices.
|
|
Overload
protection:
|
Resettable
circuit breaker
|
| INPUT |
|
Maximum
input amps:
|
24A
|
|
Input
connection type:
|
NEMA
5-20P (user installable L5-30P plug included)
|
|
Input
cord length:
|
10
ft., 10 gauge
|
|
Recommended
electrical service:
|
30A
120V
|
| BATTERY |
|
Full
load runtime:
|
6
minutes (2600VA)
|
|
Half
load runtime:
|
18
minutes (1300VA)
|
|
Expandable
battery runtime:
|
Supports
extended runtime with optional external battery
packs BP48V242U (limit 1) and BP48V60RT3U
(multi-pack compatible)
|
|
DC
system voltage:
|
48
VDC
|
|
Typical
battery lifespan:
|
3-6
years, depending on usage
|
|
Battery
recharge rate:
|
2-4
hours to 90%
|
| VOLTAGE
REGULATION |
|
Voltage
regulation description:
|
Automatic
Voltage Regulation (AVR) circuits maintain
clean, regulated computer-grade 120V nominal
output, without using battery power, during
brownouts to 79V and overvoltages to 147V
|
|
Overvoltage
correction:
|
Input
voltages between 128 and 147VAC are reduced
by 12%
|
|
Direct
pass through:
|
Input
voltages between 105 and 127VAC are passed
on to connected equipment unchanged
|
|
Brownout
correction:
|
Input
voltages between 95 and 104VAC are boosted
by 12%
|
|
Severe
brownout correction:
|
Input
voltages between 79 and 94VAC are boosted
by 24%
|
| LEDS
ALARMS & SWITCHES |
|
Front
panel LEDs:
|
5
front panel LEDs - Green POWER LED, Green
VOLTAGE CORRECTION LED, 3 color BATTERY CHARGE
LED, 3 color OUTPUT LOAD LED, red BATTERY
WARNING LED
|
|
Alarms:
|
3
function audible alarm indicates power failure
conditions (4 short beeps every 10 seconds),
overload (continuous short beeps) and low
battery (continuous tone)
|
|
Switches:
|
Yes,
includes 2 front panel mounted push-button
switches for system enable, self-test and
alarm cancel functions
|
| SURGE
/ NOISE SUPPRESSION |
|
AC
surge suppression:
|
480
joules
|
|
AC
suppression response time:
|
Instantaneous
|
|
EMI
/ RFI AC noise suppression:
|
Yes
|
| PHYSICAL |
|
Shipping
weight (lbs):
|
72
|
|
Shipping
weight (kg):
|
32.7
|
|
Unit
weight (lbs):
|
64
|
|
Unit
weight (kg):
|
29.1
|
|
Unit
Dimensions (HWD/in):
|
3.5
x 17.5 x 19
|
|
Unit
Dimensions (HWD/cm):
|
8.89
x 44.5 x 48.3
|
|
Shipping
Dimensions (HWD/in):
|
9
x 23.5 x 20
|
|
Shipping
Dimensions (HWD/cm):
|
22.9
x 59.7 x 50.8
|
|
Material
of construction:
|
Steel
|
|
Form
factors supported:
|
Rack/Tower
(2U)
|
|
Cooling
method:
|
Built-in
cooling fan
|
|
Battery
Access:
|
Battery
access door allows hot swap battery replacement
without powering connected equipment off
|
| ENVIRONMENTAL |
|
Operating
Temperature:
|
+32 to +104 degrees Fahrenheit / 0 to +40
degrees Celsius
|
|
Storage
Temperature:
|
+5 to +122 degrees Fahrenheit / -15 to +50
degrees Celsius
|
|
Relative
Humidity:
|
0
to 95%, non-condensing
|
|
Line
mode BTU/hr. (Max.):
|
285.4
BTU/hr.
|
| COMMUNICATIONS |
|
Network
monitoring port:
|
Includes
4 built-in monitoring ports, 2-USB & 2-DB9.
Each supports on battery, low battery, power
restored, AC line voltage, DC battery voltage,
load percentage, battery charge current, battery
capacity, internal UPS temperature and line
frequency status messaging. Interface supports
timed inverter shutoff after unattended shutdown,
activate self-test and 10 second reboot of
connected equipment. Supports reboot of all
connected devices at once via software interface.
Compatible with Tripp Lite's PowerAlert software.
|
|
Software
and cabling included:
|
Includes
PowerAlert UPS monitoring software for all
common network and standalone operating systems.
Ships with 4 cables, 2-USB & 2-DB9
|
|
SNMP
compatibility:
|
Built-in
accessory slot accommodates internal SNMP
/ Web card and other network accessories
|
|
WatchDog
compatibility:
|
Yes,
compatible with Tripp Lite's WatchDog system
service software to restore operation to locked
equipment through soft reboot of applications
/ OS or hard power off/on reboot of connected
equipment - ideal for unattended kiosk applications
|
| LINE
/ BATTERY TRANSFER |
|
Transfer
time from line power to battery mode:
|
2-4
milliseconds
|
|
Low
voltage transfer to battery power:
|
79V
(resets to line power as voltage increases
to 83V)
|
|
High
voltage transfer to battery power:
|
147V
(resets to line power as voltage decreases
to 144V)
|
| CERTIFICATIONS |
|
Certifications:
|
UL1778
(USA), cUL (Canada), Class A (emissions),
NOM (Mexico)
|
| WARRANTY |
|
Optional
coverage:
|
3
year, 5 year, next day and on-site warranty
coverage available for select opportunities
- contact Tripp Lite
|
|
Product
warranty:
|
2
year product warranty
|
|
Connected
equipment insurance (USA and Canada Only):
|
$250,000
connected equipment insurance (USA / Canada
only)
|
| SPECIAL
FEATURES |
|
EPO
port:
|
Includes
RJ11 EPO (emergency power off) port and interconnection
cable
|
|
TVSS
grounding:
|
Includes
back panel grounding point with thumbscrew
for data line surge suppressors and other
network accessories requiring a safe grounding
point
|
|
Cold
Start:
|
Yes,
inverter can be "cold started" to enable temporary
AC output during a power failure
|
|
Appearance:
|
Attractive
all-black color scheme
|
| BATTERY
PACK ACCESSORY (optional) |
|
Battery
Pack Accessory (optional):
|
BP48V24-2U
(limit 1) and BP48V60RT3U (multi-pack compatible)
|
