Introduction

TRENDnet's TE100-S24 is a high performance, auto-sensing 24-port NWay rack-mountable Fast Ethernet Switch. It is designed to eliminate unnecessary traffic and relieve congestion on critical network paths. With 10/100Mbps NWay technology, the TE100-S24 automatically negotiates between 10Base-T and 100Base-TX network speeds, as well as half and full duplex modes. The auto MDI-II/MDI-X detection on each port automatically detects and corrects for crossover connection and allows direct switch-to-switch or switch-to-hub connection for your networking needs.

Features

• 24 10/100Mbps NWay Auto MDI-II/MDI-X ports
• Integrate address Look-Up Engine, supports up to 8K absolute MAC address
• 2.5Mb internal RAM for frame buffering
• Full/half duplex transfer mode for each port
• Wire-speed filtering/forwarding rates
• IEEE 802.3x flow control for full-duplex mode
• Back pressure flow control for half-duplex mode
• Store-and-forward switching method
• Extensive front-panel diagnostic LEDs
• No cooling fan, for quite operation
• 5-Year Warranty

Specifications

• Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, ANSI/IEEE 802.3 NWay auto-negotiation
• Connectors: 24 10/100Mbps shielded RJ45 Auto MDI-II/MDI-X ports
• Network Cables: Cat. 3, 4, 5 UTP/STP for 10Base-T; Cat. 5 UTP/STP for 100Base-TX
• Protocols: CSMA/CD
• Data Transfer Rate:
  • Ethernet: 10Mbps (Half-Duplex), 20Mbps (Full-Duplex)
  • Fast Ethernet: 100Mbps (Half-Duplex), 200Mbps (Full-Duplex
• Data RAM Buffers: 2.5MB per device
• Filtering Address Table: 8K entries per device
• Internal Power Adapter:100~240 VAC, 10 watts max.
• Diagnostic LEDs: Power, Link/Activity, 100Mbps
• Weight: appr. 2.0 Kg (4.4 lb.)
• Dimensions: 440 x 140 x 44 mm (17.3 x 5.51 x 1.73 inch) (W x H x D)
• Temperature:
  • Operating: 0° ~ 40°C (32° ~ 104°F),
  • Storage: -10° ~ 70°C (14° ~ 158°F)
• Humidity:
  • Operating: 10% ~ 90% RH,
  • Storage: 5% ~ 90% RH
• Emission: FCC Class A, CE Mark A, VCCI-A