Photos

Specifications

Form Factor

* Extended ATX

Dimensions

* 12" x 13.05" (30.5cm x 33.2cm)

CPU

* Dual 771-pin LGA Sockets
* Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
o Quad-Core Intel®
Xeon®Processor 5300 sequence (Clovertown processor) up to 2.66 GHz
o Dual-Core Intel®
Xeon®Processor 5100/5000 sequence (Woodcrest/Dempsey processor) up to 3.73 GHz

System Bus

* 1333 / 1066 / 667 MHz system bus

Memory Capacity

* Eight 240-pin DIMM sockets
* Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
* Dual branch memory bus
* Memory must be populated in pairs
* Memory Mirroring supported

Memory Type

* 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

* 512 MB, 1GB, 2GB, 4GB

Memory Voltage

* 1.8 V only
* 1.5V(AMB)

Error Detection

* Corrects single-bit errors
* Detects double-bit errors (using ECC memory)
* Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

Chipset

* Intel® 5000P (Blackford) chipset
* MCH + PXH + ESB2

SATA

* Intel ESB2 SATA 3.0Gbps Controller
* RAID 0, 1, 5, 10 support

SAS

* Adaptec AIC-9410 Serial-Attached SCSI (SAS) Controller
* SAS Dual-Channel (internal)
* Each SAS channel supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives
* Host RAID 0, 1, & 10 support

RAID

* Support for Zero-Channel RAID with AOC-LPZCR2
* Optional: (Card not included)
* RAID 0, 1, 5, 10

IPMI

* Support for Intelligent Platform Management Interface v.2.0
* 200-pin IPMI slot (SIMLP)
* (Optional: AOC-SIMLP)

Network Controllers

* Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
* Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
* Intel® I/OAT support for fast, scaleable, and reliable networking

Graphics

* ATI ES1000 controller with 16 MB of video memory

Super I/O

* Winbond 83627HG chip

Input / Output
SAS

* Eight SAS / SATA (internal) ports
* Up to 8 SAS / SATA hard drives supported

Serial ATA

* Six Serial ATA ports
* Six SATA hard drives supported

IDE

* Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
* Compact Flash (40-pin connector, IDE 1, single channel) slot
* Supports UDMA Mode 5, PIO Mode 4, and ATA/100

Floppy

* 1 Floppy controller; 1.44 MB, 2.88 MB

LAN

* 2x RJ45 LAN ports

USB

* 2x USB rear ports
* 3x USB internal headers
* Total 5 USB 2.0 Compliant / 1.1 Compliant

VGA

* 1x VGA Port

Keyboard / Mouse

* PS/2 keyboard and mouse ports

Serial Port / Header

* 1 Fast UART 16550 serial port
* 1 Fast UART 16550 serial header

Parallel Port

* 1 ECP / EEP parallel port

Expansion Slots
PCI-Express

* 2 (x8) PCI-e slots
* 1 (x4) PCI-e (using x8) slot
* 1 SEPC (Supermicro PCI-e Power Connector) slot for 2U active riser cards with a power extension (i.e. CSE-RR2UE-AX)

PCI-X

* 2x 64-bit 133MHz PCI-X (3.3V) slots
* 1x 64-bit 100MHz PCI-X (3.3V) slot

BIOS Type

* 8Mb Flash EEPROM with Phoenix® BIOS

BIOS Features

* Plug and Play (PnP)
* SMBIOS 2.3
* DMI 2.1
* PCI 2.2
* ACPI 1.0
* USB Keyboard support
* Hardware BIOS Virus protection

Management Software

* Optional IPMI (Intelligent Platform Management Interface) 2.0
* Super Doctor III
* Watch Dog
* NMI

Power Configurations

* ACPI Power Management
* Main Switch Override Mechanism
* Wake-On-Ring (WOR) header
* Wake-On-LAN (WOL) header
* Power-on mode for AC power recovery
* Internal / External modem remote ring-on

PC Health Monitoring
CPU

* Monitors for CPU Cores, +3.3V, +5V, ±12V, +1.2V
* 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V

FAN

* Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
* 8x fans with tachometer status monitoring
* Status monitor for speed control
* Status monitor for on/off control
* Low noise fan speed control
* Pulse Width Modulated (PWM) fan connectors

Temperature

* Monitoring for CPU and chassis environment
* CPU thermal trip support
* Thermal Control for 8x fan connectors
* PSU I2C temperature sensing logic
* Thermal Monitor 2 (TM2) support

LED

* CPU / System Overheat LED

Other Features

* Chassis intrusion detection
* Chassis intrusion header
* SDDC Support

Operating Environment / Compliance
RoHS

RoHS 5/6

* RoHS Compliant 5/6, Server Exemption

Environmental Spec.

* Operating Temperature: 10º to 35º C (50º to 95º F)
* Non-operating Temperature: -40º to 70º C (-40º to 158º F)
* Operating Relative Humidity: 8% to 90% (non-condensing)
* Non-operating Relative Humidity: 5 to 95% (non-condensing)