Photos

Specifications

Form Factor
* Extended ATX

Dimensions
* 12" x 13.05" (30.5cm x 33.2cm)

CPU
* Dual 771-pin LGA Sockets
* Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
o Quad-Core Intel®
Xeon®Processor 5300 sequence (Clovertown processor) up to 2.66 GHz
o Dual-Core Intel®
Xeon®Processor 5100/5000 sequence (Woodcrest/Dempsey processor) up to 3.73 GHz

System Bus
* 1333 / 1066 / 667 MHz system bus

Operating System Software
* Supports 64-bit Operating Systems
* Supports 32-bit Operating Systems

Memory Capacity
* Eight 240-pin DIMM sockets
* Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
* Dual branch memory bus
* Memory must be populated in pairs
* Memory Mirroring supported

Memory Type
* 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes
* 512 MB, 1GB, 2GB, 4GB

Memory Voltage
* 1.8 V only
* 1.5V(AMB)

Error Detection
* Corrects single-bit errors
* Detects double-bit errors (using ECC memory)
* Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

Chipset
* Intel® 5000P (Blackford) chipset
* MCH + Two PXH + ESB2

SATA
* Intel ESB2 SATA 3.0Gbps Controller
* RAID 0, 1, 5, 10 support

SCSI
* Adaptec AIC-7902 Controller
* Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
* Host RAID 0, 1, & 10 support

RAID
* Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-LPZCR1 or AOC-LPZCR2
* Optional: (Card not included)
* RAID 0, 1, 5, 10

IPMI
* Support for Intelligent Platform Management Interface v.2.0
* 200-pin IPMI slot (SIMLP)
* (Optional: AOC-SIMLP)

Network Controllers
* Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
* Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
* Intel® I/OAT support for fast, scaleable, and reliable networking

Graphics
* ATI ES1000 controller with 16 MB of video memory

Super I/O
* Winbond 83627HG chip

Serial ATA
* Six Serial ATA ports
* Six SATA hard drives supported

IDE
* Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
* Compact Flash (40-pin connector, IDE 1, single channel) slot
* Supports UDMA Mode 5, PIO Mode 4, and ATA/100

Floppy
* 1 Floppy controller; 1.44 MB, 2.88 MB

LAN
* 2x RJ45 LAN ports

USB
* 2x USB rear ports
* 3x USB internal headers
* Total 5 USB 2.0 Compliant / 1.1 Compliant

VGA
* 1x VGA Port

Keyboard / Mouse
* PS/2 keyboard and mouse ports

Serial Port / Header
* 1 Fast UART 16550 serial port
* 1 Fast UART 16550 serial header

PCI-X
* 3x 64-bit 133MHz PCI-X (3.3V) slots
* 3x 64-bit 100MHz PCI-X (3.3V) slots

BIOS Type
* 8Mb Flash EEPROM with Phoenix® BIOS

BIOS Features
* Plug and Play (PnP)
* SMBIOS 2.3
* DMI 2.1
* PCI 2.2
* ACPI 1.0
* USB Keyboard support
* Hardware BIOS Virus protection

Management Software
* Optional IPMI (Intelligent Platform Management Interface) 2.0
* Super Doctor III
* Watch Dog
* NMI

Power Configurations
* ACPI Power Management
* Main Switch Override Mechanism
* Wake-On-Ring (WOR) header
* Wake-On-LAN (WOL) header
* Power-on mode for AC power recovery
* Internal / External modem remote ring-on

PC Health Monitoring
CPU
* Monitors for CPU Cores, +3.3V, +5V, ±12V, +5V Standby
* 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V

FAN
* Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
* 8x fans with tachometer status monitoring
* Status monitor for speed control
* Status monitor for on/off control
* Low noise fan speed control
* Pulse Width Modulated (PWM) fan connectors

Temperature
* Monitoring for CPU and chassis environment
* CPU thermal trip support
* Thermal Control for 8x fan connectors
* PSU I2C temperature sensing logic
* Thermal Monitor 2 (TM2) support

LED
* CPU / System Overheat LED

Other Features
* Chassis intrusion detection
* Chassis intrusion header
* SDDC Support

Operating Environment / Compliance
RoHS 6/6
* RoHS Compliant 5/6, Server Exemption