|
Photos

Specifications
Form
Factor
*
ATX
Dimensions
*
12" x 9.6", (30.5cm x 24.4 cm)
CPU
*
Single LGA775 ZIF Socket
* Supports an Intel® Xeon® 3000 Series (Conroe)
dual-core processor
* Supports an Intel® Pentium® D dual-core
processor
* Supports an Intel® Pentium® Extreme Edition
processor
* Supports an Intel® Pentium® 4 processor
* Supports an Intel® Celeron® D processor
* Hyper-Threading (HT) capable
System
Bus
*
1066 / 800 / 533 MHz system bus
Memory
Capacity
* Four 240-pin DIMM sockets
* Supports up to 8 GB of memory (Single / Dual Channel)
Memory
Type
*
DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM,
240-pin gold-plated DIMMs
DIMM
Sizes
*
256 MB, 512 MB, 1 GB, 2GB
Memory
Voltage
*
1.8 V only
Chipset
*
Intel 3010 (Mukilteo-2P) chipset
* ICH7R + PXH + Intel® 82573V + Intel® 82573L
Serial
ATA
*
Intel® ICH7R SATA controller built-in (3 Gbps)
* RAID 0, 1, 5, 10
IPMI
*
Support for Intelligent Platform Management Interface
v.2.0
* IPMI 2.0 with virtual media over LAN & optional
KVM-over-LAN support
* SIM1U Slot - Supermicro Intelligement Management
* (Optional: AOC-SIM1U)
* NOTE: Must use Dedicated LAN for KVM-over-LAN
function
Network
Controllers
*
2x Single-port Gigabit PCI-Express Ethernet Controllers
* Intel® 82573V + Intel® 82573L
* Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45
output
VGA
*
On-board ATI ES1000 (16MB) graphics
Super
I/O
*
Winbond 83627HG chip
Clock
Generator
*
CK410
Serial
ATA
*
Four Serial ATA ports (3 Gbps performance)
* Four SATA hard drives supported
IDE
*
One EIDE channel supports up to two UDMA IDE devices
* Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
*
1 Floppy controller; 1.44 MB
LAN
*
2x RJ45 LAN ports
USB
*
Up to 4x USB 2.0 / 1.1 compliant ports
* 2 rear ports
* 1 internal header for 2 ports
VGA
*
1x VGA port
Keyboard
/ Mouse
*
PS/2 keyboard and mouse ports
Serial
Ports
*
1x Fast UART 16550 serial port
* 1x internal header
PCI-Express
*
1 (x4) PCI-e slot
* 1 (x8) PCI-e slot
PCI
- X
*
2x 64-bit 133MHz PCI-X (3.3V) slots
* 2x 64-bit 100MHz PCI-X (3.3V) slots
BIOS
Type
*
8Mb Flash EEPROM with Phoenix BIOS®
BIOS
Features
*
Plug and Play (PnP)
* DMI 2.3 support
* PCI 2.2
* ACPI 1.0
* SMBIOS 2.3
* USB Keyboard support
Management
Software
*
Optional IPMI (Intelligent Platform Management Interface)
2.0
* Super Doctor III
* Watch Dog
* NMI
Power
Configurations
*
ACPI Power Management
* Main Switch Override Mechanism
* Wake-On-Ring (WOR) header
* Wake-On-LAN (WOL) header
* Keyboard Wakeup from Soft-Off
* CPU Fan auto-off in sleep mode
* Power-on mode control for AC power loss recovery
* Internal/External modem remote ring-on
* Suspend to RAM (STR)
PC Health Monitoring
CPU
*
Monitors for CPU Cores (+1.5V, +1.8V, +3.3V, +5,
±12V, +5V Standby, VBAT)
* CPU Core 3-Phase-switching voltage regulator with
auto-sense from 0.3750V-1.6000V
FAN
*
Total of six 4-pin fan headers
* 6x fans with tachometer monitoring
* Status monitor with firmware / software speed
control
* Status monitor for on/off control
* Support 3-pin fans (with speed control)
* Low noise fan speed control
* Pulse Width Modulated (PWM) fan connector
Temperature
*
Monitoring for CPU and chassis environment
* CPU Thermal Trip support
* Thermal Monitor (TM2) Support
LED
*
CPU / System Overheat LED
* Standby alert LED
* Suspend-state indicator LED
Other
Features
*
Chassis intrusion detection
* Chassis intrusion header
RoHS
6/6
*
RoHS Compliant 6/6, Pb Free
Environmental
Spec.
*
Operating Temperature: 10º to 35º C (50º
to 95º F)
* Non-operating Temperature: -40º to 70º
C (-40º to 158º F)
* Operating Relative Humidity: 8% to 90% (non-condensing)
* Non-operating Relative Humidity: 5 to 95% (non-condensing)
|