Specifications

Form Factor
* Extended ATX

Dimensions
* 12" x 13.05" (30.5cm x 33.2cm)

CPU
* Dual 940-pin ZIF Sockets
* Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
* VRM x3

Chipset
* AMD 8131 HyperTransport PCI-X Tunnel
* AMD 8111 HyperTransport I/O Hub

Memory Capacity
* Eight 184-pin DIMM sockets
* Supports up to 16 GB DDR 400 MHz memory or
* Supports up to 16 GB DDR 333 MHz memory or
* Supports up to 32 GB DDR 266 MHz memory
* Single or Dual (recommended) channel memory support
* For Single CPU: Memory must be populated in CPU1 DIMMs only
* For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks

Memory Type
* DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs

DIMM Sizes
* 256 MB, 512 MB, 1GB, 2GB, 4GB**

Memory Voltage
* 2.5 V only

Error Detection
* Corrects single-bit errors
* Detects double-bit errors (using ECC memory)

IPMI
* 1U support Intelligent Platform Management Interface v.2.0+ (Optional: 1UIPMI-B)
* RMM (Remote Management Module)
* (Card not included)

Network Controllers
* Broadcom® 5704 Dual Port Gigabit Ethernet Controller
* Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

VGA
* ATI Rage XL 8MB PCI Graphics Controller

IDE
* Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices

Floppy
* 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support

LAN
* 2 RJ45 LAN ports

USB
* FUCI
* Up to 5 USB Ports 1.1 Compliant

Keyboard / Mouse
* PS/2 keyboard and mouse ports

Serial Ports
* 2 Fast UART 16550 serial ports

Chassis ( Optimized for H8DAR-i )
1U Chassis
* SC812i-420C*
* SC812L-420C*

* Please use air-shroud CSE-PT0082 (Air-shrouds sold separately) Important Chassis Notes
* To ensure system stability, a 420W (minimum) ATX power supply [8-pin (+12V) and 24-pin are required]

PCI-X
* 1 64-bit 100MHz PCI-X (3.3V) slot

IPMI
* IPMI 2.0 expansion slot

BIOS Type
* 4Mb Flash EEPROM with AMI® BIOS

BIOS Features
* Plug and Play (PnP)
* SMBIOS 2.3
* DMI 2.3
* ACPI 2.0
* Fan Speed Control

Management Software
* Optional IPMI (Intelligent Platform Management Interface) 2.0
* Super Doctor III
* Watch Dog

Power Configurations
* ACPI/API Power Management
* Wake-On-LAN (WOL) header
* Power-on mode control for AC power loss recovery
* Internal/External modem remote ring-on

PC Health Monitoring
CPU
* Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V Standby, +5V Standby, HyperTransport voltage 1.2V, memory voltage 2.5V, DDR termination 1.25V, chipset voltage 1.8V
* Up to 5 fan status
* Supports System Management Utility

FAN
* Total up to 5-fan status
* 3-pin fan speed control

Temperature
* Monitoring for CPU and chassis environment

LED
* Overheat LED

Other Features
* Chassis Intrusion Header

Photos