Features

• Best Single Opteron CPU Solution
• Most Cost Effective Dual Core Workstation
• High-End A+ ServerBoard with SATA RAID

Specifications

Form Factor
* Extended ATX

Dimensions
* 12" x 13.05" (30.5cm x 33.2cm)

CPU
* Dual 940-pin ZIF Sockets
* Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
* Single CPU configurations are not recommended
* VRM x3

Chipset
* nVidia nForce Pro 2200 (CK804)
* AMD 8132

Memory Capacity
* Eight 184-pin DIMM sockets
* Supports up to 16 GB DDR 400 MHz memory or
* Supports up to 32 GB DDR 333 MHz memory or
* Supports up to 32 GB DDR 266 MHz memory
* Single or Dual (recommended) channel memory support
* For Single CPU: Memory must be populated in CPU1 DIMMs only
* For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks

Memory Type
* DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs

DIMM Sizes
* 256 MB, 512 MB, 1GB, 2GB, 4GB**

Memory Voltage
* 2.5 V only

Error Detection
* Corrects single-bit errors
* Detects double-bit errors (using ECC memory)

SAS
* Adaptec AIC-9410W SAS Controller
* 8 SAS Ports
* RAID 0, 1, 10
* Zero-Channel RAID: Supermicro All-In-One ZCR card: AOC-LPZCR1

SATA
* nVidia nForce Pro 2200 SATA 3.0Gbps Controller
* 4 SATA Ports
* nVidia RAID 2.0
* SATA RAID 0, 1, 0+1 Support

IPMI
* 1U support: Intelligent Platform Management Interface v.2.0+ (Optional: 1UIPMI-B)
* Remote Management Module
* (Card not included)

Network Controllers
* Two Broadcom BCM5721 Gigabit LAN / Ethernet Controllers
* Supports 10Base-T, 100Base-TX, and 1000Base-T, RJ45 output

Graphics
* ATI Rage XL 8MB

Super I/O
* Winbond 83627HG

Clock Generator
* ICS8634

BIOS Type
* 8Mb Flash EEPROM with AMI® BIOS
* 49LF080A BIOS Chip

BIOS Features
* Plug and Play (PnP)
* SMBIOS 2.3
* DMI 2.3
* ACPI 2.0 / 1.0
* BIOS Rescue Hot Keys
* USB Keyboard Support

Chassis ( Optimized for H8DCR-3 )
1U Chassis
* SC813TQ+-500

Important Chassis Notes
* To ensure system stability, a 500W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 20-pin are required]

PCI-Express
* 2 PCI-express x8 slots

PCI-X
* 1 64-bit 100MHz PCI-X slot
* 1 64-bit 133MHz PCI-X slot
* Note: Dual Processors are required for correct PCI-X expansion slot operation

Serial Attached SCSI
* Integrated Adaptec AIC-9410W(SAS) Controller
* Two Serial Attached SCSI (SAS) ports (1 internal, 1 external)
* Each SAS port supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives

Serial ATA
* Integrated SATA 3.0Gbps Controller
* Four Serial ATA Ports
* Four SATA hard drives supported

IDE
* Dual EIDE channels support up to four UDMA IDE devices
* Supports UDMA Mode 5
* Supports PIO Mode 4
* Supports ATA 100/133

Floppy
* 1 Floppy port, 1.44 MB

LAN
* 2 RJ45 LAN ports

USB
* FUCI
* Up to 4 USB Ports 2.0 Compliant, 1.1 Compatible
* 2 Rear Ports
* 2 Internal Headers

VGA
* 1 VGA port

Keyboard / Mouse
* PS/2 keyboard and mouse ports

Serial Ports
* 1 Fast UART 16550 serial port
* 1 header

Management Software
* Super Doctor III
* Watch Dog / NMI
* Optional IPMI 2.0

Power Configurations
* ACPI Power Management
* Wake-On-Ring (WOR) headert
* Wake-On-LAN (WOL) header
* Power-on mode control for AC power loss recovery
* Internal/External modem remote ring-on

PC Health Monitoring
CPU
* Monitors CPU Core Voltages, +1.5V, +2.5V, +3.3V, +5V, ±12V, HyperTransport Link voltage 1.2V, memory voltage 2.5V, 3.3V Standby, VBAT

FAN
* Total up to 5-fan status tachometer monitoring
* Up to five 3-pin fan headers

Temperature
* Monitoring for CPU and chassis environment
* CPU Thermal Trip Support
* I2C Temperature Sensing Logic

LED
* CPU / System Overheat LED
* Suspend-State Indicator LED
* +5V Standby Alert LED

Other Features
* Chassis Intrusion Header
* Chassis Intrusion Detection

Photos