Introduction

Loaded with features and optimized in an ATX form factor, the 5000V chipset-based serverboard products support Dual-Core Xeon® processors 5000/5100 series with ample amount of FB-DIMM memory support, PCI-Express expansion, gigabit connectivity, and remote management options.

Specifications

Form Factor
* ATX

Dimensions
* 12" x 10" (30.5cm x 25.4cm)

CPU
* Dual 771-pin LGA Sockets
* Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
o Dual-Core Intel® Xeon® Processor 5100/5000 sequence (Woodcrest/Dempsey processor) with 2MB L2 Integrated Advanced Transfer Cache per core, 4MB L2 cache total, up to 3.73 GHz

System Bus
* 1333 / 1066 / 667 MHz system bus

Memory Capacity
* Six 240-pin DIMM sockets
* Supports up to 16 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
* Dual branch memory bus
* Memory must be populated in pairs
* No Memory Mirroring support

Memory Type
* 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes
* 512 MB, 1GB, 2GB, 4GB

Memory Voltage
* 1.8 V only
* 1.5V(AMB)

Error Detection
* Corrects single-bit errors
* Detects double-bit errors (using ECC memory)
* Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

Chipset
* Intel® 5000V (Blackford VS) chipset
* MCH + ESB2

SATA
* Intel ESB2 SATA 3.0Gbps Controller
* RAID 0, 1, 5, 10 support

IPMI
* Support for Intelligent Platform Management Interface v.2.0
* 200-pin IPMI slot (SIM1U)
* (Optional: AOC-SIMLC)

Network Controllers
* Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
* Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

Graphics
* ATI ES1000 controller with 16 MB of video memory

Super I/O
* Winbond 83627HG chip

Serial ATA
* Six Serial ATA ports
* Six SATA hard drives supported

IDE
* Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S)
* Supports UDMA Mode 5, PIO Mode 4, and ATA/100

Floppy
* 1 Floppy controller; 1.44 MB, 2.88 MB

LAN
* 2x RJ45 LAN ports

USB
* 2x USB rear ports
* 2x USB internal headers
* Total 6 USB 2.0 Compliant / 1.1 Compliant

VGA
* 1x VGA Port

Keyboard / Mouse
* PS/2 keyboard and mouse ports

Serial Port / Header
* 1 Fast UART 16550 serial port
* 1 Fast UART 16550 serial header

Parallel Port
* 1 Header for ECP / EEP parallel port

Chassis ( Optimized for X7DVL-E )
1U Chassis
* SC811T-520
* SC512F-520 (Mini 1U)

2U Chassis
* SC825TQ-R700LPV
* SC825TQ-560LP
* SC823T-550LP

Tower / 4U Rackmount
* SC743TQ-R760
* SC743T-650
* SC743T-645 (FAN-0091 required)
* SC743i-645 (FAN-0091 required)

Mid-Tower
* SC733TQ-645 (MCP-310-00010-01 air shroud required)
* SC733T-645
* SC733i-645

Important Chassis Notes
* To ensure system stability, a 500W (minimum) ATX power supply [8-pin (+12V) and 24-pin are required]

PCI-Express
* 1 (x8) PCI-e slot
* 1 (x4) PCI-e (using x8) slot

PCI-X
* 2x 64-bit 133/100MHz PCI-X (3.3V) slots

PCI
* 2x 32-bit 33MHz PCI (3.3V) slots

BIOS Type
* 8Mb Flash EEPROM with Phoenix® BIOS

BIOS Features
* Plug and Play (PnP)
* SMBIOS 2.3
* DMI 2.1
* PCI 2.2
* ACPI 1.0
* USB Keyboard support
* Hardware BIOS Virus protection

Management Software
* Optional IPMI (Intelligent Platform Management Interface) 2.0
* Super Doctor III
* Watch Dog
* NMI

Power Configurations
* ACPI Power Management
* Main Switch Override Mechanism
* Wake-On-Ring (WOR) header
* Wake-On-LAN (WOL) header
* Power-on mode for AC power recovery
* Internal / External modem remote ring-on

PC Health Monitoring
CPU
* Monitors for CPU Cores, +3.3V, +5V, ±12V
* 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V

FAN
* Total of six 4-pin fan headers supporting up to 6 fans
* 6x fans with tachometer status monitoring
* Status monitor for speed control
* Status monitor for on/off control
* Low noise fan speed control
* Pulse Width Modulated (PWM) fan connectors

Temperature
* Monitoring for CPU and chassis environment
* CPU thermal trip support
* Thermal Control for 6x fan connectors
* PSU I2C temperature sensing logic
* Thermal Monitor 2 (TM2) support

LED
* CPU / System Overheat LED

Other Features
* Chassis intrusion detection
* Chassis intrusion header
* SDDC Support

Operating Environment / Compliance
RoHS 5/6
* RoHS Compliant 5/6, Server Exemption

Environmental Spec.
* Operating Temperature: 10º to 35º C (50º to 95º F)
* Non-operating Temperature: -40º to 70º C (-40º to 158º F)
* Operating Relative Humidity: 8% to 90% (non-condensing)
* Non-operating Relative Humidity: 5 to 95% (non-condensing)

Photos