Features

• Complied with ATX and ATX12V standard
  
• High efficiency and reliability
  
• Remote On/Off function
  
• Internal 12V DC fan included
  
• Noise Killer (Thermal fan speed control function)
  
• Low noise and ripple
  
• Complies with FCC part 15 subpart J class B and CISPR 22 Class B
  
• Output over voltage, short circuit, and over current protection
  
• 100% Hi-pot, ATE, and burn-in tested
  
• Re-settable power shut down
  
• Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, Nemko (CB Report)
  

Specifications

• Temperature Range: Operating 0° C ~ +50° C on full load; storage & shipping -20° C ~ +65° C
  
• Humidity: 90% on operating and 95% on storage
  
• Dielectric Withstand: Primary to frame ground 1800V AC for 1 second
  
• Efficiency: 65% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
  
• Rise Time: Less than 20ms on all outputs
  
• Hold-up Time: 16ms minimum at 115V/60Hz; 20ms minimum at 230V/50Hz input voltage
• Input Characteristics
  • Input Range: 95~132/180~264V AC, Manual-select
    
  • Frequency: 47~63Hz
    
  • Input Current: 10A (RMS) @115V AC, 5A (RMS) @230VAC
    
  • Inrush Current: 80A Max for 132V AC Cold Start
    
• Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
  
• Leakage Current: Less than 3.5mA
  
• MTBF: 100,000 hours on maximum load at +25° C degree
  
• Dimension (WxHxL): 150x86x140mm/5.9”x3.4”x5.5” inches