Photos

Introduction

Intelligent Networking Features for a Scalable, Secure Solution
Intelligent Networking Features for a Scalable, Secure Solution NETGEAR’s ProSafe Dual Band Wireless Access Point WAG102 delivers the secure, reliable, high performance wireless local area networks (WLANs) today's mobile workforce demands. The WAG102 Access Point supports both 5 GHz and 2.4 GHz 54 Mbps radio transmission with up to 108 Mbps** in both 802.11g and 802.11a in turbo mode. It supports up to 128 simultaneous wireless clients and client types within the same coverage area. WAG102 brings standards-based enterprise-level functionality at a mid-market price with features such as robust security measures, simplified management and configuration, integrated IEEE 802.3af power over Ethernet (PoE), and Wi-Fi certification. Supports Simple Network Management Protocol (SNMP) and is optimized for NETGEAR ProSafe Network Management Software NMS100.

Secure
Complies with industry security standards for wireless data encryption, and user authorization. It provides support for WPA2 and 802.1x to enable strong mutual authentication to ensure only legitimate clients have access to the network. 802.11i, WPA2 Enterprise provides enhanced, interoperable wireless networking security. Supports MAC address authentication with 256-user Access Control Lists (ACL) and VPN pass-through.

Versatile
Cost effective, simple to install and use. Wi-Fi Certified and plenum rated—appropriate for placement above drop-down ceilings and under raised floors. Equipped with convenient Smart Wizard™ browser-based interface. Fitted with two powerful detachable 5 dBi antennas and compatible with NETGEAR’s ProSafe 2.4 GHz antennas for expanded wireless capacity and range. Protected with a NETGEAR 3-year warranty. WAG102 includes the embedded IEEE 802.3af Power over Ethernet (PoE) port which expands installation options by eliminating the need to locate the WAG102 near a power outlet.

Features

• Universal 802.11a/b/g Wi-Fi access provides maximum WLAN performance in high-density, high interference deployments—as many as 128 simultaneous users
• High-speed connectivity, up to 108 Mbps in turbo mode, on both bands
• Integrated IEEE 803.3af Power over Ethernet (PoE) and plenum rating maximize placement options
  

Specifications

Physical Specifications
* Dimensions (H x W x D): 32 x 190.5 x 122 mm (1.25 x 7.5 x 4.8 in.)
* Weight: .62 kg (1.3 lb)

Wireless
* Standard: IEEE 802.11a up to 108 Mbps; 802.11g up to 108 Mbps Wireless Access Point
* Antennas: Two (2) detachable antennas: (1) 5 dBi, 2.4 GHz and (1) 5 dBi 5 GHz

Physical Interfaces
* LAN Port: One (1) 10/100BASE-T Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support
* Power adapter: 12 VDC, 1.0A power supply; plug is localized to country of sale.
* Six (6) LEDs: Power, Test, 100 Mbps, Link/ACT, and WLAN 802.11g
* Antenna Connector: Two (2) reverse SMA antenna connectors

Network Management
* Remote configuration and management through Web browser, SNMP
* SNMP management supports SNMP MIB I, MIB II, and 802.11 MIB

Advanced Wireless Features
* Point-to-point wireless bridge mode
* Point-to-multipoint wireless bridge mode
* Repeater mode
* Adjustable Transmit Power Control (TPC) from 100 mW down to 0 mW

Typical Maximum Power Output
* 802.11b mode, 1 to 11 Mbps + 19 dBm
* 802.11g mode, 6 to 24 Mbps + 18 dBm
* 802.11g mode, 36, 48 and 54 Mbps + 17/16/16 dBm

Note: Maximum Tx varies based on country and/or region selection to ensure local regulatory compliance.

Receive Sensitivity
* 802.11b
o 2 Mbps -94 dBm
o 5.5 Mbps -92 dBm
o 11 Mbps -90 dBm

* 802.11g
o 6 Mbps -91 dBm
o 9 Mbps -91 dBm
o 12 Mbps -90 dBm
o 18 Mbps -87 dBm
o 24 Mbps -85 dBm
o 36 Mbps -80 dBm
o 48 Mbps -75 dBm
o 54 Mbps -70 dBm

* 802.11a
o 6 Mbps -92 dBm
o 9 Mbps -91 dBm
o 12 Mbps -90 dBm
o 18 Mbps -86 dBm
o 24 Mbps -84 dBm
o 36 Mbps -79 dBm
o 48 Mbps -72 dBm
o 54 Mbps -70 dBm

Power Over Ethernet Required
* 4.3 W

Security
* 40/64-, 128-, and 152-bit WEP encryption
* Block SSID Broadcast
* VPN pass-through support
* MAC address filtering with access control lists – up to 256 users
* 802.1x RADIUS support with EAP TLS, TTLS, PEAP
* Wi-Fi Protected Access (WPA2)
* Secure Socket Layer (SSL) remote management login

Standards, Safety and Electromagnetic Conformance
* IEEE 802.11g (2.4 GHz Frequency Band, DSSS Modulation Type)
* IEEE 802.3af Power over Ethernet (PoE)
* FCC Part 15 Subpart B and Subpart C
* CE EN 60950-1 (2001), EN 301 489-17 V1.2.1 (2002), EN 301 489-1 V1.4.1 (2002), EN 300 328-1 (2001-12), EN 300 328-2 (2001-12),
* R&TTE Directive
* 99/5/EC, CSIPR22(B), AS/NZS 3548 (B)
* Plenum Rated
* IEEE 802.11g (2.4 GHz Frequency Band, DSSS Modulation Type)
* IEEE 802.11a
* IEEE 802.3af Power over Ethernet (PoE)
* FCC Part 15 Subpart B , Subpart C and E
* C-Tick: AS/NZ 3548 Class B
* CE EN 60950-1 (2001), EN 301 489-17 V1.2.1 (2002-08), EN 301 489-1 V1.4.1 (2002-08), EN 300 328-1 (2001-12), EN 300 328-2 (2003--4), EN301893(5GHz),EN60601, R&TTE Directive 99/5/EC

Environmental Specifications
* Operating temperature: 0 to 40° C (32 to 104° F)
* Operating humidity: 90% maximum relative humidity, noncondensing

Package Contents

• ProSafe Dual Band Wireless Access Point WAG102
  
• Two (2) 5 dBi Detachable Antennas
  
• Resource CD
  
• Power adapter
  
• Ethernet cable
  
• Installation guide
  
• Warranty/Support information card

System Requirements

• Windows® 98, Me, 2000 or XP
  
• 2 MB of available disk space