|
Introduction
Intelligent
Networking Features for a Scalable, Secure
Solution
NETGEAR’s ProSafe 802.11g Wireless Access
Point WG102 delivers the secure, reliable,
high performance wireless local area networks
(WLANs) today's mobile workforce demands.
This
powerful device provides the industry standard
access to corporate network resources, email
and the Internet and includes support for
MBSSID/VLANs, to enable more granualar access
to the network. Fully compatible with IEEE
802.11g, (2.4 GHz), it can also be set for
dynamic 108 Mbps 802.11g. With its robust
security measures, simplified management and
configuration, SNMP support, integrated IEEE
802.3af power over Ethernet (PoE), IntellilFi™
RF Management Technology and Wi-Fi certification,
the WG102 brings standards-based enterprise-level
functionality at a mid-market price.
Secure
Complies with industry security standards
for wireless data encryption, and user authorization.
WPA2-Enterprise (802.11i) provides enhanced,
interoperable wireless networking security.
WPA2 and 802.1x support enables strong mutual
authentication to ensure that only legitimate
clients associate with corporate RADIUS servers.
Supports MAC address authentication with 256-user
Access Control List (ACL) and VPN pass-through.
The WG102 provides support for multiple Basic
Service Set Identifiers (BSSID) and Virtual
LANs (VLANs). You can configure combination
of VLANS and BSSIDS to provide stronger or
less restrictive access to the network according
to your requirements. For example visitors
could be given wireless access for the internet,
but could be excluded from any access to the
internal network.
Dynamic
WG102 with integrated IntelliFi radio frequency
(RF) management technology, enables a wireless
network to self optimize by intelligently
choosing channels and dynamically adjusting
the power levels to ensure coverage and avoid
interference. IntelliFi creates an additional
level of privacy by providing self-organizing
micro cells for enterprises. An additional
level of security is added when used with
NETGEAR’s IntelliFi-enabled client adapter,
WAG511. In addition, the WG102 supports the
ability to detect rogue access points and
rogue stations.
Flexible
Cost effective, compact, and simple to install
and use. Integrated PoE support expands installation
options by eliminating the need to locate
near a power outlet. Wi-Fi certified and plenum-rated
for appropriate placement above drop-down
ceilings and under raised floors. Supports
Simple Network Management Protocol (SNMP)
and optimized for NETGEAR ProSafe Network
Management System NMS100. Equipped with convenient
Smart Wizard™ browser-based interface.
Fitted with two powerful detachable 5 dBi
antennas and compatible with NETGEAR’s
ProSafe 2.4 GHz antennas for expanded wireless
capacity and range. Protected with a NETGEAR
3-year warranty.
Features
-
High-speed IEEE 802.11g, up to 108 Mbps
in turbo mode
- Wi-Fi
Protected Access™ (WPA) -- 802.11i-ready
security
- Integrated
IEEE 802.3af Power over Ethernet (PoE)
Specifications
Physical
Specifications
- Dimensions:
14.1 x 10 x 2.7 cm (5.56 x 3.94 x 1.06 in.)
- Weight:
386 g (.85 lb)
Wireless
- Standards:
IEEE 802.11g 54 Mbps
- Antennas:
One (1) 5 dBi detachable 2.4 GHz
Physical Interfaces
- LAN
Port: One (1) 10/100BASE-T Ethernet (RJ-45)
port with Auto UplinkT (Auto MDI-X) with
IEEE 802.3af Power over Ethernet (PoE) support
- Power
adapter: Output 12 VDC, 1.2 A; plug is localized
to country of sale
- Four
(4) LEDs: Power, Test, 100 Mbps, Link/ACT,
and WLAN 802.11g
- Antenna
Connector: One (1) reverse SMA
Network Management
- Remote
configuration and management through Web
browser
- SNMP
management supports SNMP MIB I, MIB II,
and 802.11 MIB
Advanced Wireless Features
- Point-to-point
wireless bridge mode
- Point-to-multipoint
wireless bridge mode
- Repeater
mode
- Adjustable
Transmit Power Control (TPC) from 100 mW
down to 0 mW
- IntelliFi
RF Management functionality including auto
power transmission, channel selection
Typical Maximum Power Output
- 802.11b
mode, 1 to 11 Mbps +19 dBm
- 802.11g
mode, 6 to 24 Mbps +18 dBm
- 802.11g
mode, 36, 48 and 54 Mbps +17/16/16 dBm
Note: Maximum Tx varies based on country and/or
region selection to ensure local regulatory
compliance.
Receive Sensitivity
- 802.11b
- 2
Mbps -93 dBm
- 5.5
Mbps -91 dBm
- 11
Mbps -89 dBm
- 802.11g
- 6
Mbps -91 dBm
- 9
Mbps -90 dBm
- 12
Mbps -89 dBm
- 18
Mbps -87 dBm
- 24
Mbps -84 dBm
- 36
Mbps -81 dBm
- 48
Mbps -77 dBm
- 54
Mbps -75 dBm
- 108
Mbps -73 dBm
Power Over Ethernet Required
Security
- Wi-Fi
Protected Access (WPA2-Enterprise) and 802.11i
- Block
SSID Broadcast
- VPN
pass-through support
- MAC
address filtering with access control lists
- up to 256 users
- 802.1x
RADIUS support with EAP TLS, TTLS, PEAP
- Ability
to detect rogue access points and rogue
stations
- Ability
to configure multiple BSSIDs and VLANs to
provide more granular access to the network
based upon user type
Standards, Safety and Electromagnetic Conformance
- IEEE
802.11g (2.4 GHz Frequency Band, DSSS Modulation
Type)
- IEEE
802.3af Power over Ethernet (PoE)
- FCC
Part 15 Subpart B and Subpart C
- CE
EN 60950-1 (2001), EN 301 489-17 V1.2.1
(2002), EN 301 489-1 V1.4.1 (2002), EN 300
328-1 (2001-12), EN 300 328-2 (2001-12),
- R&TTE
Directive 99/5/EC, CSIPR22(B), AS/NZS 3548
(B)
- Plenum
Rated
Environmental Specifications
- Operating
temperature: 0 to 40° C (32 to 104° F)
- Operating
humidity: 90% maximum relative humidity,
noncondensing
Package
Contents
- WG102
- Ethernet
cable
- Power
adapter
- Resource
CD
- Installation
guide
- Warranty/Support
information card
System
Requirements
-
Windows® 98, Me, 2000, or XP
- 2
Mbytes of available disk space
Photos
|
