Introduction

Intelligent Networking Features for a Scalable, Secure Solution

NETGEAR's ProSafe 802.11g Wireless Access Point WG302 delivers the secure, reliable, high performance wireless local area networks (WLANs) today's mobile workforce demands.

This powerful device provides the ultimate in industry standard access to corporate network resources, email and the Internet. Fully compatible with IEEE 802.11g, (2.4 GHz), it can also be set for dynamic 108 Mbps 802.11g. With its robust security measures, simplified management and configuration, extended range, integrated IEEE 802.3af power over Ethernet (PoE), and Wi-Fi certification, the WG302 brings standards-based enterprise-level functionality at a mid-market price.

Security

Complies with industry security standards for wireless data encryption, and user authorization. 802.11i, WPA2 Enterprise provides enhanced, interoperable wireless networking security. WPA and 802.1x support enables strong mutual authentication to ensure that only legitimate clients associate with corporate RADIUS servers. Supports MAC address authentication with 256- user Access Control List (ACL) and VPN pass-through.

Management

Integrated IEEE 802.3af-based Power over Ethernet (PoE) support eliminates extra cables and the need to locate near a power outlet, as the access point is powered over the Ethernet cable. Supports Simple Network Management Protocol (SNMP) MIB I, MIB II, and 802.11 MIB using SNMP-based network management software, such as HP OpenView™. Supports all popular 802.1x port-based authentication protocols, including Extensible Authentication Protocol (EAP) Transport Layer Security (TLS), Protected EAP (PEAP), and Tunneled TLS (TTLS). Console port facilitates local configuration and monitoring. Users can remotely configure, update, and monitor multiple WG302's simultaneously via FTP.

Aptitude

IEEE 802.11g wireless standard — with optional speeds up to 108 Mbps — takes care of business communications with great dispatch and skill. Delivers functionality for point-to-point and point-to-multi-point bridging and repeater modes.

Usability

Cost effective, simple to install and use. Plenum rated - appropriate for placement above drop-down ceilings and under raised floors. Equipped with convenient Smart Wizard™ browser-based interface. Fitted with two external, detachable 5 dBi antennas — obtain NETGEAR's antenna and flexible point placement accessories separately for expanded wireless capacity and range. IEEE 802.11e-based Quality of Service (QoS) support is available via future firmware upgrade. Protected with a NETGEAR 3-year warranty.

* Free basic installation support provided for 90 days from date of purchase. Advanced product features and configurations are not included in free basic installation support; optional premium support available.

Features

• High-speed networking with IEEE 802.11g, up to 108 Mbps in turbo mode
• Wi-Fi Protected Access (WPA) security support
• Wireless Distribution System (WDS) supports bridging and repeater modes

Specifications

Physical Specifications

• Dimensions: 25.4 x 17.8 x 3.18 cm (10 x 7 x 1.25 in.)
• Weight: 574 g (1.27 lb)
• Processor and memory: Intel® IXP422, 8 MB Flash, 16 MB DRAM

Wireless

• Standards: IEEE 802.11g 54 Mbps
• Antennas: Two (2) 5 dBi detachable
• Typical maximum power output: 19.8 dBm
• Typical maximum receive sensitivity: 96 dB

Note: Maximum Tx varies based on country and/or region selection to ensure local regulatory compliance.

Physical Interfaces

• LAN Port: One (1) 10/100BASE-T Ethernet (RJ-45) port with Auto UplinkT (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support
• Power adapter: Output 12 VDC, 1.2 A; plug is localized to country of sale
• Five (5) LEDs: Power, Test, 100 Mbps, Link/ACT, and WLAN 802.11g
  
• Console Port: One (1) with standard RS-232C interface with DB-9 male connector
• Antenna Connectors: Two (2) reverse SMA

Network Management

• Remote configuration and management through Web browser, SNMP or Telnet with command line interface (CLI)
• SNMP management supports SNMP MIB I, MIB II, and 802.11 MIB

Advanced Wireless Features

• Bridging and repeater mode
• Simultaneous wireless bridge and access point mode
• Adjustable transmit power control 100 mW down to 0 mW
• Wi-Fi Multimedia (WMMT) to optimize audio, video, and voice applications

Receive Sensitivity

• 802.11b
  • 1 Mbps -93 dBm
  • 2 Mbps -92 dBm
  • 5.5 Mbps -92 dBm
  • 11 Mbps -89 dBm
• 802.11g
  • 6 Mbps -93 dBm
  • 9 Mbps -90 dBm
  • 12 Mbps -90 dBm
  • 18 Mbps -88 dBm
  • 24 Mbps -84 dBm
  • 36 Mbps -80 dBm
  • 48 Mbps -76 dBm
  • 54 Mbps -75 dBm

Security

• Wi-Fi Protected Access 2 (WPA2) and 802.11i-ready
• Block SSID Broadcast
• VPN pass-through support
• MAC address filtering with access control lists - up to 256 users
• 802.1x RADIUS support with EAP TLS, TTLS, PEAP
• Secure SSH Telnet
• Secure Socket Layer (SSL) remote management login
• Wireless isolation enables peer-to-peer blocking so users may not access another user's PC

Standards, Safety and Electromagnetic Conformance

• IEEE 802.11g (2.4 GHz Frequency Band, DSSS Modulation Type)
• IEEE 802.3af Power over Ethernet (PoE)
• FCC Part 15 Subpart B and Subpart C
• CE EN60950, EN 300328-2 v1.1.1 (2000-07), EMC EN301489-1 v1.2.1 (2000-08), and EN301489-17 v1.1.1 (2000-09), EN55022(B), CISPR22(B), AS/NZS 3548(B)

Environmental Specifications

• Operating temperature: 0 to 40° C (32 to 104° F)
• Operating humidity: 90% maximum relative humidity, noncondensing

Package Contents

• WG302
  
• Ethernet cable
  
• Power adapter
  
• Resource CD
  
• Installation guide
  
• Warranty/Support information card

System Requirements

• Windows® 98, Me, 2000, or XP
  
• 2 Mbytes of available disk space
  

Photos