Introduction

NETGEAR's popular FS100 series desktop switches, known for their reliability and performance, provide your LAN with high-speed, 10/100 Mbps auto-sensing connectivity for as many as 5, 8, or 16 users. Just plug in your Ethernet cables, connect a power cord, and you're ready to go-there's no software to configure. They negotiate to the fastest possible connection and with Auto Uplink™ technology, these switches automatically figure out if the link needs a straight-through or cross-over connection, and makes the right choice. Existing 10BASE-T devices are easily integrated within higher bandwidth environments, with full wire speeds on all ports of either 10 Mbps or 100 Mbps. Engineered without the need for internal fans, they operate silently. And each of these very compact switches is housed in a sturdy metal case for years of dependable use.

When you want solid network performance for your growing business, plus the added benefit of quiet operation, NETGEAR's ProSafe™ FS105, FS108, and FS116 are your best choices for quality, convenience, and smooth - running usability - all at very affordable prices.

At Your Service
Five, eight, or sixteen ports provide LAN access for many users. Every port supports up to 200 Mbps in dedicated bandwidth and traffic is forwarded flawlessly with automatic flow control.

Compact
Solidly built in small sizes that are easy to position when space is at a premium. Ideal for conference rooms, class rooms, study groups or small offices. Place it on any flat surface or use the included wall mount kit to tuck it out of the way.

Simple To Use
Once you connect the hardware, your switch is operating! Auto negotiation takes care of the speed and duplex, while Auto Uplink takes care of the MDI/MDI-X connection. Eliminate the need for toggle switches or special crossover cables.

Quiet
No fan means no noise, which helps maintain a peaceful atmosphere in your busy office.

Specifications

Network Ports
· 5 auto-speed-sensing UTP ports

Standards Compliance
· IEEE 802.3 10BASE-T Ethernet
· IEEE 802.3u 100BASE-TX Fast Ethernet
· IEEE 802.3x Full-duplex Flow Control

Performance Specifications
· Forwarding modes: Store-and-forward
· Bandwidth: 1 Gbps
· Network latency: Less than 20 µs for 64-byte frames in store-and-forward mode for100 Mbps to 100 Mbps transmission
· Buffer memory: 64 KB
· Address database size: 1,000
· Addressing: 48-bit MAC address
· Mean Time Between Failure (MTBF): 390,000 hours (~40 years)

Environmental Specifications
· Operating temperature: 32 to 104°F (0 to 40° C)
· Storage temperature: 14 to 158°F (-10 to 70°C)
· Operating humidity: 90% maximum relative humidity, non-condensing
· Storage humidity: 95% maximum relative humidity, non-condensing
· Operating altitude: 10,000 ft (3,000 m) maximum
· Storage altitude: 10,000 ft (3,000 m) maximum

Safety Agency Approvals
· UL listed (UL 1950)/cUL
· IEC950/EN60950

Status LEDs
· Power
· Link, speed, and activity indicators built into each RJ-45 port

Electromagnetic Emissions
· CE mark, commercial
· FCC part 15 Class A
· EN55 022 (CISPR22), Class A
· VCCI Class A
· C-Tick

AC Power
· 7.5W (7.5VDC, 1A)

Physical Specifications
· Dimensions: 3.7 x 4.1 x 1.1 in (94 x 103 x 27 mm)
· Weight: 0.62 lbs (0.28 kg)

Warranty
· 5 years for unit
· 2 years for power adapter

Package Contents
· 5 Port 10/100 Desktop Switch
· Wall-mount kit
· AC adapter
· Quick Installation guide
· Warranty/Support information card

Photos