|
Introduction
Hang
on – your network will soar when it's
hooked up to NETGEAR's FS605! This powerful
plug-and-play switch connects at 10 or 100
Mbps and makes it easy to link as many as
eight computers or peripherals to your Ethernet
network. You'll experience maximum performance
for 10 or 100 Mbps devices with eight ports
that automatically sense the correct speed
while Auto Uplink™ on the ports adjusts
for the different types of Ethernet cables.
The FS605's sleek case has lights on the front
for easy monitoring. Installation into your
home network couldn't be simpler and, once
powered on, it begins cool and silent operation
– without an internal fan.
|
|
|
Features
- Plug
and Play installation, no configuration
- Auto-detects
speed and duplex
- Auto
Uplink™ makes the right connection
- 100
Mbps access/200 Mbps in full-duplex
- Vertical
option saves space on your desk
Versatile
Connects up to eight computers, servers, printers,
switches or any other Ethernet devices at
10 or 100 Mbps over Ethernet cables. Works
with virtually any operating system (Microsoft®
Windows®, Apple® Macintosh®, Linux®
and more).
User-Friendly
Designed specifically for home and small office
users with Plug-and-Play installation, rear
ports that reduce cable clutter, and front
status lights for easy monitoring.
Resourceful
All eight ports deliver automatic speed and
duplex sensing, plus Auto Uplink™ adjusts
for different Ethernet cable types to make
the right link everytime. No connection problems
from using the wrong cable.
Well-Designed
Sleek, modern case combines with other NETGEAR
Platinum products so you can place them on
top of each other. Or you can use the included
vertical stand to conserve desk space. Trust
your network to NETGEAR's built-to-last reliability
from using high-quality components.
Specifications
| Network
Protocol and Standards Capability: |
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x Flow Control
compatible with Windows®, Mac®
OS, NetWare®, Linux® |
| Interface: |
RJ-45 connectors for 10BASE-T and 100BASE-TX
All ports have Auto Uplink (Auto MDI-X)
|
Power
Consumption:
|
3.7
W maximum |
| Physical
Specifications: |
6.9"
x 4.6" x 1.1" (175 mm 118 mm 28 mm)
0.61 lb (0.28 kg) |
| Status
Lights: |
Power
light; speed and activity light on each
port |
| Environmental
Specifications: |
Operating
Temperature: 0° to 40°C
Storage Temperature: -20° to 70°C
Operating Relative Humidity: 90% non-condensing
Acoustic noise: 0 dB |
| Performance
Specifications: |
Prame filter and forward rates:
•14,800 frames/sec max for 10M port
•148,000 frames/sec max for 100M
port
•Non-blocking, wire-speed frame forward
rate
Forwarding modes: Store-and-forward
Network latency: Less than 20 microseconds
for 64-byte frames for 100 Mbps to 100
Mbps transmission
Address database size: 1,000 media access
control (MAC) addresses
Addressing: 48-bit MAC address
Queue buffer: 128 kilobytes
Maximum cable length: 328 feet (100 M) |
| Electromagnetic
Emissions: |
CE mark, commercial
FCC Part 15, Class B
EN 55 022 (CISPR 22)Class B
C-Tick
EN 55 024
TUV (EN 60950) |
| Electromagnetic
Susceptibility: |
CE Mark, commercial
Electrostatic discharge (ESD): IEC 801-2,
Level 2/3
Radiated electromagnetic field: IEC 801-3,
Level 2 |
| Warranty: |
2 years |
|
