|
Photos
Specifications
CPU
• Supports 64-bit AMD® Sempron, Athlon™
64 / Athlon 64 X2 processor (Socket AM2)
• Supports Athlon 64 CPU: 3000+, 3200+, 3500+,
3800+, and 4000+
• Supports Athlon 64FX CPU: FX-60 and FX-62
• Supports Athlon 64 X2 CPU: 3600+, 3800+,
4000+, 4200, 4400+, 4600+, 4800+, 5000+, 5200+,
5400+, and up
Chipset
• AMD ® 690G Chipset
- HyperTransport connection to AMD AM2 Athlon 64
processor
- 8 or 16 bit control/address/data transfer both
direction
- 1GHz "Double Data Rate" operation both
direction
- Supports one PCI-E x16 slot
- Radeon X1250 Graphic integrated shared up to 512MB
• ATI SB600 Chipset
- Supports SATAII controllers for four drives
- Supports single channel Ultra DMA 66/100/133 master
mode EIDE controller
- ACPI & PC2001 compliant enhanced power managment
- Supports Hi-Speed (USB2.0) controller 480 mbsec
transfer rate up to 10 ports
Main Memory
• Supports Dual Channel DDR2 533/667/800, using
two 240-pin DDR DIMMs.
• Supports the memory size up 4GB
• Supports 1.8v DDR2 SDRAM DIMM
Due to the High Performance Memory design, motherboards
or system configurations may or may not operate
smoothly at the JEDEC (Joint Electron Device Engineering
Council) standard settings (BIOS Default on the
motherboard) such as DDR2 voltage, memory speeds
and memory timing. Please confirm and adjust your
memory setting in the BIOS accordingly for better
system stability.
Example: Kingston HyperX DDR2-800 PC-6400 operates
at 2.0V, 4-4-4-12.
For more information about specification of high
performance memory modules, please check with your
Memory Manufactures for more details.
Slots
• One PCI Express X16 slot
• One PCI Express X1 slot
• Two 32-bit Master 3.3v/5v PCI Bus slots
On-Board IDE/SATA
• An IDE controller on the ATI SB600 chipset
provides IDE HDD/CD-ROM with PIO, Bus Master and
Ultra DMA133/100/66 operation modes.
- Can connect up to 2 IDE devices
• SB600 supports 4 SATA II ports
- Transfer rate is up to 300MB/s
- Supports RAID 0, 1, 0+1
BIOS
• The mainboard BIOS provides "Plug &
Play" BIOS which detects the peripheral devices
and expansion cards of the board automatically.
• The mainboard provides a Desktop Management
Interface (DMI) function which records your mainboard
specifications.
• Supports boot from LAN, USB Device 1.1 &
2.0 and SATA HDD
Audio
• 7.1 Channel software audio codec Realtek
ALC883
• Compliance with Azalia v1.0 spec.
• Flexible 8-channel audio with jack sensing
LAN
• Realtek® 8111B
- Supports 10Mb/s, 100Mb/s and 1000Mb/s
IEEE1394
• Support up to 2 IEEE 1394 ports, transfer
rate is up to 400Mbps
• Controlled by VIA VT6308 chipset
On-Board Peripherals
- 1 floppy port supports 1 FDD with 360K, 720K,
1.2M, 1.44M and 2.88Mbytes
- 1 VGA port
1 HDMI port
- 2 IEEE 1394 ports (rear x 1 / front x 1)
- 1 parallel port supporting SPP/EPP/ECP mode
- 10 USB2.0 ports (rear x 4 / front x 6)
- 1 Audio jack (5-in-1), coaxial/fiber SPDIF out
- 1 TV-out header
- 1 RJ-45 LAN Jack
- 1 IDE ports support 2 IDE devices
- 4 serial ATA ports
- 1 serial port header
Dimension
9.61 in (L) x 8.2 in(W) Micro-ATX Form Factor
Mounting
6 mounting holes
|
