|
Introduction
The
Linksys Wireless-G PrintServer lets you connect
a USB printer directly to your network, eliminating
the need to dedicate a PC to print sharing
chores. Using a PrintServer frees up your
""print share PC"" so
you don't have to leave it on all the time.
It also removes the printing bottleneck, and
sets your PC free to do more useful work.
Connect
the PrintServer directly to your network by
10/100 Ethernet cable, or wirelessly over
54Mbps Wireless-G (802.11g). The wireless
option lets you put your printer wherever
you want to, without having to run cables.
Whichever way the PrintServer is attached
to your network, both your wireless and wired
PCs will have access to it, and the printer
it's connected to. And if you don't use wireless
for general networking in your office, you
can still use the Wireless-G connection in
ad-hoc mode to print from visiting Wireless-G
and Wireless-B PCs.
The
USB port is compatible with USB 1.1 printers,
as well as printers that support the new high-speed
USB 2.0 specification for even faster throughput.
Your data is protected by up to 128-bit WEP
encryption, or pre-shared-key WPA. A user-friendly
Setup Wizard makes installation easy, the
compact case fits anywhere, and the three
megabyte print buffer size handles even large
graphics-intensive print jobs. Let the Linksys
Wireless-G PrintServer for USB 2.0 bring efficiency
to your printing tasks.
Features
- Complies
with IEEE 802.11g, 802.11b, 802.3 standards
- Features
a high-speed USB 2.0 port that is backward
compatible with USB 1.1
- Supports
TCP/IP, SMB (Service Message Block), AppleTalk
(EtherTalk), and NetBEUI.
- Setup
Wizard program makes it easy to configure
the Wireless-G PrintServer in Windows 98SE,
ME, 2000 or XP.
- SNMP
management allows users to monitor, configure
and troubleshoot using existing SNMP management
tools.
- Built-in
IPP (Internet Printing Protocol) Server
and Windows IPP client, enables printing
to your printer from anywhere on the Internet.
Note:
This PrintServer is not compatible with multifunction
printers and does not work with a USB hub
that is connected to multiple USB printers.
Specifications
- Model
Number WPS54G
- Standards
IEEE 802.11g, IEEE 802.11b, IEEE 802.3,
- IEEE
802.3u, USB 2.0
- Ports
Power, Ethernet, USB Printer
- Buttons
Reset
- Cabling
Type USB 2.0, UTP CAT5
- LEDs
Power, Ethernet, Wireless, USB
- Security
Features WEP, WPA-PSK
- WEP
Key Bits 64, 128
- Dimensions
5.24" x 0.98" x 2.76" (133
mm x 25 mm x 70 mm)
- Unit
Weight 3.80 oz. (0.11 kg)
- Power
5 V DC, 2A
- Certifications
FCC, CE
- Operating
Temp. 0ºC to 40ºC (32ºF to
104ºF)
- Storage
Temp. -20ºC to 70ºC (-4ºF
to 158ºF)
- Operating
Humidity 10% to 85% Non-Condensing
- Storage
Humidity 5% to 90% Non-Condensing
Photos
|
