Intoduction
The
Linksys Wireless-G Access Point lets you connect
Wireless-G (802.11g) or Wireless-B (802.11b)
devices to your wired network so you can add
PCs to the network with no cabling hassle.
Power over Ethernet support makes it easy
to install -- you can mount the Access Point
anywhere, even without ready access to a power
plug. With appropriate Power Over Ethernet
support at the other end, you only need to
run one cable to the Access Point to deliver
both data and power.
It's
also perfect for use as a bridge, a kind of
"cable-less cable" to connect remote
areas together. Maybe Shipping is all the
way across the warehouse from Receiving. Or
maybe you want to set up a home office in
your detached garage. With one Wireless-G
Access Point in each end, you're connected
at 54Mbps – with no cable to run.
To
protect your data and privacy, the Wireless-G
Exterior Access Point supports both Wired
Equivalent Privacy (WEP) and the industrial-strength
wireless security of Wi-Fi Protected Access™
(WPA), encoding all your wireless transmissions
with powerful encryption. The MAC Address
filter lets you decide exactly who has access
to your wireless network, and advanced logging
and emailed intrusion alerts keep you appraised.
You can create multiple SSIDs that connect
to individual VLANs to keep your traffic separated.
Configuration is a snap with the web browser-based
configuration utility.
The
Linksys Wireless-G Access Point with Power
Over Ethernet is the best way to add wireless
access to your existing business network.
- Add
high-speed Wireless-G access to your wired
small business network
- Data
rates up to 54Mbps in Wireless-G (802.11g)
mode, or 11Mbps in Wireless-B (802.11b)
- Multiple
SSID and VLAN support keeps your traffic
separated
- Advanced
security with WPA encryption, logging, and
wireless intrusion protection
Specifications
- Mfr
Part Number: WAP54GP
- Standards:
IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u,
IEEE802.3af (Power Over Ethernet), IEEE802.1p
(QoS Priority), IEEE802.1q (VLAN), 802.1x
(Security Authentication), 802.11i - Ready
(Security WPA2), 802.11e - Ready (Wireless
QoS)
- Ports:
Ethernet, Antenna, Power
- Buttons:
Reset
- Cabling
Type: UTP CAT 5
- LEDs:
Power, Ethernet, Wireless-G
- Setup/Configuration:
Web UI - Built-in Web UI for Easy Browser-based
Configuration (HTTP/HTTPS)
- Management:
- SNMP
Version: SNMP Version 1, 2c
- Event
Logging: Event Logging
- Web
F/W Upgrade: Firmware Upgradeable through
Web Browser
- Diags:
Flash, RAM, LAN, WLAN
- Operating
Modes: Access Point Mode; Point-to-Point
(Bridge); Point-to-MultiPoint (Bridge);
Repeater
- Wireless:
- Specs/Modulation:
Radio and Modulation Type- 802.11b/DSSS,
11g/OFDM
- Data
Rates Data Rates: Supported 11b - 1,
2, 5.5, 11 Mbps; 11g - 6, 9, 11, 12,
18, 24, 36, 48, 54 Mbps
- Operating
Channels: 11 North America, 13 Most
of Europe (ETSI and Japan)
- Number
of Internal Antenna: None
- Number
of External Antenna: 1 (Omni-Directional)
- Antenna
Connector Type: RSMA
- Transmit
Power: Transmit Power (Adjustable) @
Normal Temp Range:
- 11g:
Typical - 14dBm
- 11b:
Typical - 18dBm
- Receiver
Sensitivity: 11g - 54Mbps@ -69dBm, 11b
- 11Mbps@ -82dBM
- Security:
- WEP/WPA/WPA2:
WEP - 64bit/128bit; WPA-TKIP/AES; WPA-PSK;
WPA-ENT
- 802.1x
RADIUS Auth.: 802.1x - RADIUS (MD5,
SHA1, TLS, TTLS, PEAP) Dynamically Varying
Encryption Keys
- Access
Control List (ACL) Capability: MAC-Based
- SSID
Broadcast: Enable/Disable
- Multiple
SSID: Supported
- Wireless
VLAN Map: Supports SSID to 802.1q VLAN
Mapping with Wireless Client Isolation
- Power:
12V 1A, IEEE802.3af Compliant PoE
- Certifications:
FCC, CE
- Dimensions
(WxDxH): 1.26 x 6.89 x 7.83 inch / 32
x 175 x 199 mm
- Weight:
1.01 lbs / 0.46 kg
|
