Intoduction

Turn up the volume on your Wireless LAN! The Linksys Wireless Signal Booster piggybacks onto your Linksys Wireless Access Point (or Wireless Access Point Router) to increase the effective range and coverage area of the 802.11b network. The added signal strength also helps speed up your close-range communications, because every packet comes through “loud and clear”, reducing retransmissions due to reception errors.

To install, just stack the Wireless Signal Booster on your Access Point, move the antennas to the Booster, and attach the Booster's twin cables to the Access Point—no drivers or modifications to your setup are necessary.

• Increase the effective range of the WAP11 Wireless Access Point or BEFW11S4 Wireless Access Point Router (only)
  
• Stronger signal improves throughput by reducing retransmissions
  
• Save on wiring costs—increase your Access Point’s coverage into hard-to-reach areas
  
• Simple installation—stack, connect, and go
  

• Increase the coverage of the WAP11 and BEFW11S4
  
• Wireless transmission become more efficient as retransmission are decreased
  
• Save on wiring costs with enterprise-level coverage
  

• Model Number WSB24
  
• Standards IEEE 802.11b
  
• Ports Two RP SMA and Two RP TNC connectors
  
• Peak Gain +14 dBm
  
• Receiver Gain +20 dBm (nominal)
  
• Tx Input Power +5 dBm (minimum) - +20 dBm (maximum)
  
• LEDs Power
  
• Dimensions 7.32 x 2.48 X 6.10 inches (186 mm x 63 mm x 155 mm)
  
• Unit Weight 1.87 lbs. (0.85 kg)
  
• Power 5V DC - 2.5A. Consumes 600mA on TX and 80mA on RX
  
• Certifications FCC
  
• Operating Temp. -40° C to 70° C (-40° F to 158° F)
  
• Storage Temp. -40° C to 120° C (-40° F to 248° F)
  
• Operating Humidity 10% to 85% Non-Condensing
  
• Storage Humidity 5% to 90% Non-Condensing
  
• Package Contents
  
• Instant Wireless® Wireless Signal Booster
  
• One Wireless Signal Booster
  
• Setup diagram (printed)
  
• Registration card
  
• Two RP SMA to RP TNC connection cables
  
• Power adapter