|
Introduction
The
16-Port 10/100/1000 Gigabit Switch provides
non-blocking, wire speed switching for your
10, 100, and 1000 megabit network clients.
Drop this switch in place of your current
workgroup hub or switch, and you can upgrade
your high-requirement workstations to full
Gigabit speeds as necessary, while continuing
to service other clients at their current
speeds. Or build your network from the ground
up, with appropriate link speeds for each
user's requirements. Either way, it's perfect
for graphics, multimedia, and other applications
that have to move large files across the network
quickly.
With
the 16-Port 10/100/1000 Gigabit Switch, you
can connect your existing 10/100 Ethernet
network to a Gigabit server backbone without
any additional equipment. All ports have automatic
MDI/MDI-X crossover detection, so you don't
have to worry about the cable type. Each port
independently and automatically negotiates
for best speed and whether to run in half-
or full-duplex mode. Address learning and
aging is supported, as well as 802.3x flow
control with head-of-line blocking prevention
to keep your high-speed clients from bogging
down in lower-speed traffic. Fast store-and-forward
switching prevents damaged packets from being
passed on into the network.
World
famous Linksys reliability and the limited
lifetime warranty give you peace of mind and
the rackmount form factor integrates smoothly
into your network infrastructure. Let the
Linksys 16-Port 10/100/1000 Gigabit Switch
kick your network into high gear.
Features
-
16 RJ-45 ports for 10BASE-T/ 100BASE-TX/1000BASE-TX
connections
- Supports
half duplex and full duplex modes auto-negotiation
for all ports.
- Auto
MDI/MDI-X support on all ports for easy
cable detection
- Efficient
MAC Address learning engine supports up
to 8K MAC Addresses
- Provides
store-and-forward forwarding scheme.
- Standard
width and mounting kit (included) make it
easy to be installed into a rack
- Integrated
256K packet buffer memory
- Supports
Jumbo frame of 9K bytes
- Supports
IEEE802.3x full duplex operation
- RoHS
Compliant
Specifications
- Model
SR2016
- Standards
IEEE 802.3, 802.3u, 802.3x, 802.3ab
- Ports
16 RJ-45 10/100/1000
- Cabling
Type Category 5e or better
- LEDs
System, 1 through 16
- Dimensions
11.00 x 1.75 x 9.45 inches (W x H x D) 279.4
x 44.5 x 240 mm
- Weight
4.75 lbs (2.155 kg)
- Power
12V DC / 500mA
- Certification
FCC Class A, CE
- Operating
Temp. 0ºC to 40ºC (32ºF to
104ºF)
- Storage
Temp. -40ºC to 70ºC (-40ºF
to 158ºF)
- Operating
Humidity 20% to 95% relative humidity
- Storage
Humidity 5% to 95% Non-Condensing
Package
Contents
- 16-Port
10/100/1000 Gigabit Switch
- AC
Power Cord
- User
Guide with On-line Registration Card
- Set
of Rack Mounting brackets
Photos
|
