Photos

Introduction

The Iomega® REV® USB Backup Kit is a revolutionary removable hard disk system which makes backing up and archiving easy by providing everything needed to keep critical data safe and secure. This professional-level backup kit includes one Iomega REV USB 2.0 drive and six Iomega 35GB REV disks - one disk for each weekday backup and one disk for full system backup and disaster recovery - all at a value only Iomega can provide. Each Backup Kit also includes powerful CA BrightStor® ARCserve® Backup software for professional-level full system backup capabilities for both servers and workstations - an estimated 1,000 value

The Iomega® REV® USB 2.0 Backup Starter Kit with CA BrightStor® ARCserve® Backup At-A-Glance:

• Value-Add: Everything you need to get started with backing up, or replacing an existing tape, hard drive or optical backup solution. Including 6 REV disks, professional-level CA BrightStor ARCserve Backup software (single server) - an estimated $1,000 value
  
• Robust: Professional-level backup software included - CA BrightStor ARCserve Backup for Windows (single server) plus Disaster Recovery
  
• Easy to Use: Includes My First Backup Tutorial and an easy to use startup Wizard. No cleaning or maintenance required; appears as a standard drive letter
  
• High-Capacity: 35GB native and 70GB compressed capacity to store and share large files, or back up an entire system on a single disk. The six disks combined provide 210GB native and 420GB compressed capacity
  
• Fast: Back up and recover files up to 8 times faster than tape
  
• Low Cost: Iomega® REV® systems are a better value compared to traditional tape drives
  
• Efficient: Retrieve files in seconds, versus minutes, with drag-and-drop (compared to linear access with tape drives)
  
• Reliable: Proven hard disk technology for ultimate reliability
  
• Durable: Rigid disks offer virtually unlimited rewritability
  
• Secure: Password protect confidential data and encrypt your backups
  
• Expandable: Add capacity when you need it with cost-efficient Iomega REV disks

Package Contents

• Retail Box
• Iomega® REV® 35GB USB 2.0 Backup Starter Kit
  
• One REV 35GB USB 2.0 Drive
  
• Six REV 35GB disks (in plastic case with disk labels)
  
• One USB 2.0 Data Cable
  
• One Power Supply
  
• One Solutions CD containing:
  • REV System Software
    
  • PC only. Compatible with Microsoft® Windows® 2000 / XP
    
  • HTML User Manual and Help Files
• CA BrightStor® ARCserve® Backup for Windows standard edition (single server) plus Disaster Recovery CD
  
• Quick Install Guide
  
• One year warranty on drive. Five year warranty on disks.
  
• Software provided under license

Specifications

Capacity:
o Native: 35GB
o High compression w/included software: 70GB
o Usable data bytes: 35,002,122,240

Interface/connection type:
o One (1) USB 2.0 connection on the back of the drive
o What is USB?
o Backward compatible with USB 1.1 connections.
o Note: The REV USB drive is not host powered. You must use in the included power supply.

Included Cable:
o One (1) 3ft (1m) standard USB cable.

Weight:
o Drive: 0.86 lbs. (392 grams)
o Disk: 2.58 ounces (73 grams)

Dimensions (L x W x H):
o Drive: 6.14 in x 4.33 in x 1.41 in
o Disk: 2.95 in x 3.03 in x 0.39 in

Configuration:
o Bytes per Sector: 2,048
o User Logical Sectors: 17,090,880
o Track Density (normal): 88,000 tracks/inch
o Linear Density (max): 695,000 bits/inch
o Areal Density (max): 61.16 Gigabits/square inch
o Number of Heads: 2
o Head Type: GMR
o Number of Disks: 1
o Substrate Type: Smooth Glass disk
o Servo: Embedded
o Zones: 18
o Data Recording Method (coding): 48/50 Modified E²PRML

Power requirements:
o Power Supply: 5.0 +/- .25 V D.C., up to 1.2 amps continuous current

Seek time:
o Minimum (single track): 2.5 ms (read), 3.0 ms (write)
o Average: 12 ms (read), 13 ms (write)
o Maximum: 25 ms

Latency:
o 7.1 ms

Spindle Speed:
o 4200 rpm

Start Time:
o 12 sec

Stop Time (including eject):
o 6 sec

Native Drive Transfer Rate (USB 2.0):
Note: Actual speeds may be limited by the bus type – for instance, the transfer rate of many USB 2.0 host controller chips do not exceed 15 MBytes/second.
o Burst (USB 2.0): 60 MB/sec
o Max. Data Transfer Rate (outer disk): 25.4 MB/sec
o Max. Data Transfer Rate (inner disk): 12.7 MB/sec

Native Drive Transfer Rate (USB 1.1):
o Max. Data Transfer Rate: 1.5 MB/sec
Note: The maximum data transfer rate of any device connected to USB 1.1 is 1.5 MB/sec

MTBF:
o 400,000 hours

Unrecoverable Data Error Rate:
o (projected) 1 error in 10^15 bits transferred

Cartridge Life:
o 2,000 insertion and removal cycles

Drive Life:
o 10,000 insertion and removal cycles

Drive Service Life:
o Approx. 5 years

Cartridge Shelf Life:
o >30 years

Typical Insertion Force:
o 1.5 kgf (3.3 lbf)

Temperature:
o Ambient Operating Environment (non-condensing): 0 to 45 degrees C. (32 to 113 degrees F)
o Ambient Non-operating Environment: -40 to 65 degrees C. (-40 to 149 degrees F)
o Max Temperature Gradient: 12 degrees C. per hour (22 degress F. per hour)

Humidity:
o Ambient Operating Humidity (non-condensing): 8 to 90% R.H.
o Ambient Non-operating Humidity (non-condensing): 5 to 95% R.H.
o Max Wet Bulb Temperature - Operating: 29.0 degrees C. (84 degrees F.)
o Max Wet Bulb Temperature - Non-operating: 40.0 degrees C. (104 degrees F.)
o Electro Static Discharge: Up to 8KV air discharge, or 4KV contact

Vibration:
o Operating Reads/Writes: 0.4 g (zero to peak; 5-20 Hz) / 0.2 g (zero to peak; 20-300 Hz)
o Sequential Reads (internal unit): 1.0 g (zero to peak; 5-300 Hz)
o Non-operating Disk: 2.5 g (zero to peak; 5-500 Hz)
o Non-operating Drive: 1.3 g (zero to peak; 5-27 Hz) / 2.0 g (zero to peak; 27-60 Hz) / 2.5 g (zero to peak; 60-500 Hz)

Shock:
o Operating: 60 g (2 ms half sine)
o Non-operating Disk: 400 g (2 ms half sine)
o Non-operating Drive: 200 g (2 ms half sine)
o Typical Cartridge Drop (outside of case): up to 1.22 meters (48 inches) onto commercial grade carpet
o Cartridge Drop (inside of case): up to 1.52 meters (60 inches) onto hard floor

Altitude:
o Operating: -300 to 3,048 meters (10,000 feet)
o Non-operating: -300 to 12,192 meters (40,000 feet)

Drive Supply Voltage:
o 5.0 V

Seek (Peak):
o 1.18 A current draw; 5.9 W power consumption

Startup (Peak):
o 1.15 A current draw; 5.8 W power consumption

Eject (Peak):
o 0.92 A current draw; 4.6 W power consumption

Continuous Writes (RMS):
o 0.92 A current draw; 4.6 W power consumption

Continuous Reads (RMS):
o 0.89 A current draw; 4.5 W power consumption

Random Read-Writes (RMS):
o 0.89 A current draw; 4.5 W power consumption

Idle (RMS):
o 0.60 A current draw; 3.0 W power consumption

Additional Features
o Advanced air filtration, automatic head cleaning, and robust two-stage error correction to ensure high data integrity and reliability
o Automatic sector reallocation
o Adaptive power save control
o MMC-4 multi-media command set

Requirements

PC Users :

• 333MHz Pentium II processor minimum, compatible with USB 1.1 or USB 2.0 connection (USB 2.0 required to achieve maximum speeds).
  
• 128MB RAM
  
• Microsoft® Windows XP Professional, Server 2003 (Standard Edition), Small Business Server 2003* (Standard and Premium Editions), 2000 Professional/Server/Advanced Server (SP4 or higher)
  
• CD-ROM drive
  
• 100MB hard drive space required to install software depending on applications and options selected (excludes temporary cache)
  
• Microsoft® Internet Explorer® 5.0 or higher Netscape® Navigator® 6.1 or higher (to view User's Manual and download Iomega Software.)