|
Introduction
Conserve
valuable PCI Express (PCIe*) server slots
while adding multi-port Gigabit Ethernet capability
with the Intel® PRO/1000 PT Dual Port
Server Adapter. The dedicated input/output
(I/O) bandwidth of PCIe ensures priority performance
on each port, without bus sharing, for Gigabit
Ethernet connectivity in Category-5 networks.
Additionally, the Intel PRO/1000 PT Dual Port
Server Adapter is designed to provide high
performance in multi-processor systems by
efficiently balancing network loads across
multiple Central Processing Units (CPUs) when
used with Receive-Side Scaling from Microsoft
or Scalable I/O on Linux.
The
Intel PRO/1000 PT Dual Port Server Adapter
features 10/100/ 1000 Mbps self-configuration
for compatibility with mixed-speed network
devices, and is supported by Intel® PRO
Intelligent Install and the new Intel®
PROSet Utility for Microsoft* Device Manager.
Intel PROSet simplifies adapter installation
and gives you point-and-click power to configure
and manage all your Intel PRO Network Connections
for connectivity you can count on.
-
Two high-performance PCI Express 10/100/1000
Mbps connections for slot-constrained servers
- Multi-Gigabit
scalability and increased uptime through
advanced server features
- Built
on Intel® lead-free1 technology
Features
| Features |
Benefits |
| Intel®
82571GB Gigabit Controller |
Enables
two Gigabit connections in a single adapter,
delivering increased bandwidth for slot-constrained
servers and providing high performance,
reliability, and low power use in a single,
integrated, dual port PCI Express Gigabit
Ethernet controller chip |
| Load
balancing on multiple CPUs |
Increases
performance on multi-processor systems
by efficiently balancing network loads
across CPU cores when used with Receive-Side
Scaling from Microsoft or Scalable I/O
on Linux* |
| Interrupt
moderation |
Delivers
increased performance while significantly
reducing CPU utilization |
| Compatible
with x4, x8, and x16 full-height and low-profile
PCI Express* slots |
Allows
dual-port operation in almost any PCI
Express server slot, except x1 slots,
and allows each port to operate without
interfering with the other |
| Support
for most network operating systems (NOS) |
Enables
widespread deployment |
| Remote
management support |
Reduces
support costs with remote management based
on industry-wide standards |
| Category-5
unshielded twisted pair (UTP), 4-pair
cabling |
Uses
existing 4-pair cabling and saves re-wiring
costs |
| RoHS
compliant2, lead-free1 technology |
Compliant
with the new European Union directive
(effective July 2006) to reduce the use
of hazardous materials |
| Intel®
PROSet Utility for Microsoft* Device Manager |
Provides
point-and-click power over individual
adapters, advanced adapter features, connection
teaming, and virtual local area network
(VLAN) configuration |
| Advanced
cable diagnostics |
Dynamically
tests and reports network problems (error
rate, cable length) and automatically
compensates for cable issues (cross-over
cable, wrong pin-out/polarity) |
| Intel
backing |
Backed
by an Intel® limited lifetime warranty,
90-day money-back guarantee (U.S. and
Canada), and worldwide support |
Specifications
- Product
code EXPI9402PT4
- Connectors
Two RJ-45
- IEEE
standards/network topology 10BASE-T, 100BASE-TX,
1000BASE-T
- Wiring
Category-5, unshielded twisted pair (UTP),
4-pair
- Data
rate(s) supported per port 10, 100, and
1000 Mbps
- Bus
type PCI Express 1.0a
- Bus
width x4 lane PCI Express, operable in x4,
x8, x16 slots
- Bus
speed (x4, encoded rate) 10 Gbps uni-directional;
20 Gbps bi-directional
- EEPROM-SPI
and single EEPROM support
- Interrupt
levels INTA
- IEEE
support 802.3ab*
- Hardware
certifications FCC B, UL, CE, VCCI, BSMI,
CTICK, MIC
- Controller-processor
Intel® 82571EB
- Typical
power consumption 4.95 W ( 3.3 V @ 1.5 A)
- Operating
temperature 0–55° C
- LEDs
4 (1/port, link and speed) solid and blinking
Photos
|
