|
Introduction
The
Intel PRO/1000 PT Server Adapter provides
the dedicated input/output (I/O) bandwidth
of PCIe, without bus sharing, for Gigabit
Ethernet connectivity in Category-5 networks.
The Intel PRO/1000 PT Server Adapter is designed
to provide high performance in multi-processor
systems by efficiently balancing network loads
across multiple Central Processing Units (CPUs)
when used with Receive-Side Scaling from Microsoft
or Scalable I/O on Linux*. It also features
10/100/1000 Mbps self-configuration for compatibility
with mixed-speed network devices.
For
easy installation and management, all Intel®
PRO Network Connections are supported by Intel®
PRO Intelligent Install and the new Intel®
PROSet Utility for Microsoft* Device Manager.
Intel PROSet simplifies adapter installation
and gives you point-and-click power to configure
and manage all your Intel PRO Network Connections
for connectivity you can count on.
-
High-performance, self-configuring 10/100/1000
Mbps connection for PCI Express* slots
- Multi-Gigabit
scalability and increased uptime through
advanced server features
- Optional
low-profile bracket included for high-density,
rack-mounted servers
Features
| Features |
Benefits |
| Intel®
82572GI Gigabit Controller |
Enhances
high performance and reliability |
| Load
balancing on multiple CPUs |
Increases
performance on multi-processor systems
by efficiently balancing network loads
across CPU cores when used with Receive-Side
Scaling from Microsoft or Scalable I/O
on Linux* |
| Interrupt
moderation |
Delivers
increased performance while significantly
reducing CPU utilization |
| Compatible
with x1, x4, x8, and x16 full-height and
low-profile PCI Express* slots |
Allows
use in any PCI Express server slotlow |
| Support
for most network operating systems (NOS) |
Enables
widespread deployment |
| Remote
management support |
Reduces
support costs with remote management based
on industry-wide standards |
| Category-5
unshielded twisted pair (UTP), 4-pair
cabling |
Uses
existing 4-pair cabling and saves re-wiring
costs |
| RoHS
compliant,1 lead-free2
technology |
Compliant
with the new European Union directive
(effective July 2006) to reduce the use
of hazardous materials |
| Intel®
PROSet Utility for Microsoft* Device Manager |
Provides
point-and-click power over individual
adapters, advanced adapter features, connection
teaming, and VLAN configuration |
| Advanced
cable diagnostics |
Dynamically
tests and reports network problems (error
rate, cable length) and automatically
compensates for cable issues (cross-over
cable, wrong pin-out/polarity) |
| Intel
backing |
Backed
by an Intel® limited lifetime warranty,
90-day money-back guarantee (U.S. and
Canada), and worldwide support |
Specifications
- Product
code EXPI9400PT3
- Connectors
RJ-45
- IEEE
standards/network topology 10BASE-T, 100BASE-TX,
1000BASE-
- Wiring
Category-5, UTP, 4-pair
- Data
rate(s) supporter per port 10, 100, and
1000 Mbps
- Bus
type PCI Express 1.0a
- Bus
width x1 Lane PCI Express, operable in x1,
x4,x8, x16 slots
- Bus
speed (x1, encoded rate) 2.5 Gbps uni-directional;
5 Gbps bi-directional
- EEPROM-SPI
and single EEPROM support
- Interrupt
levels INTA
- IEEE
support 802.3ab*
- Hardware
certifications FCC B, UL, CE, VCCI, BSMI,
CTICK, MIC
- Controller-processor
Intel® 82572EI
- Typical
power consumption 3.3 W (3.3 V @ 1 A)
- Operating
temperature 0-55° C
- LEDs
2 (1/port, link and speed) solid and blinking
Photos
|
