|
Specifications
Connectors:
LC
IEEE
Standard/Network Topology:
1000BASE-SX
Wiring:
Multi-mode fiber (62.5 um or 50 um)
Adapter
Product Features:
Intel® SingleDriver™ technology
Plug and Play Specification Support
Easy Installation, Intel® PROSet II Utility
Auto-negotiation, Full-duplex Capable
Includes a Low-profile and a Full-height Bracket
Cable
Distance:
275m at 62.5 um
550m at 50 um
Network
Management Features:
Wired
for Management (WfM) Baseline v2.0 Enabled
for Servers
DMI 2.0 Support, WMI and SNMP-manageable
Offline Diagnostics
Intel® Boot Agent
ACPI Power Management
Wake on LAN
PXE 2.0
NOS
Software Support:
Windows 2000, and XP
Windows NT 4.0
Novell NetWare 4.11, 4.2, & 5.0, 5.1,
6.0
SunSoft Solaris 7, 8
UnixWare 7.x and OpenUNIX 8 (ddi8)
Linux 2.2.5 or Later
FreeBSD (latest kernel)
Advanced
Software Features:
Adapter Fault Tolerance
Switch Fault Tolerance
Adaptive Load Balancing
Receive Load Balancing
Gigabit EtherChannel (when used with a capable
switch)
IEEE 802.3ad (Link Aggregation Control Protocol
available when used with a capable switch)
Test Switch Configuration
PCI Hot Plug and Active PCI
IEEE 802.1Q VLANs
IEEE 802.3x Flow Control
TCP Checksum Offload
IEEE 802.1p
TCP Segmentation/Large Send Off-load
Interrupt Moderation
Save and Restore
Technical
Features:
Data Rate(s) Supported per Port: 1000 Mbps
Bus Type: PCI/PCI-X
Bus Width: 32 or 64-bit
Bus Speed (MHz): 33/66/100/133
Onboard Memory: 64 KB
Interrupt Levels: INTA
IEEE Support: 802.3z
Hardware Certifications: FCC A, CE
Data Transfer Mode: Bus-master DMA
Controller: Processor Intel ® 82545EM
Typical Power: Consumption 1A at +5VDC
Operating Temperature: 0-55°C
Operating Humidity: 85% at +55°C
Physical
Dimensions:
Length: 16.5cm (6.6 in)
Width: 6.4cm (2.5 in)
Height of Full-Height End Bracket: 12.1cm
(4.75 in)
Height of Low-Profile End Bracket: 8.1cm (3.2
in)
Intel
Backing:
Limited Lifetime Warranty
|
