| Processor |
Support
for one IntelŪ
PentiumŪ 4 processor with 1MB of integrated
L2 cache and an 800MHz system bus |
| System
Memory |
| Capacity |
Four
DIMM sockets serviced by dual memory channels
for up to 4 GB of ECC DDR2 400/533 memory; memory
can be implemented with either single-sided
(one row) or double-sided (two row) DIMMs |
| Type |
Unbuffered
ECC or standard DDR2 400/533 SDRAM 72-bit, 240-pin
gold-plated DIMMs |
| Memory
Voltage |
2.5V
only |
| Reliability
Features |
Corrects
single-bit errors, detects multiple-bit errors
(using ECC memory); supports IntelŪ x4 Single
Device Data Correction (SDDC), scrubbing, retry
on uncorrectable errors |
| Integrated
Onboard |
| Chipset |
IntelŪ
E7221 Chipset |
| IntelŪ
Server Network Connections |
Dual
integrated IntelŪ
82541PI Gigabit Ethernet Controllers supporting
10BASE-T, 100BASE-T and 1000BASE-T; two RJ45
connectors for CAT6 TP cable |
| Super
I/O Controller |
National
Semiconductor* PC87427, including fan speed
control/monitor pins |
| Integrated
Hardware Monitoring |
National
Semiconductor LM96000 controller including remote
alerts |
| Graphics |
An
internal IntelŪ MCH module that includes an
integrated graphics engine supporting standard
SVGA drivers with analog display capabilities;
8 MB of memory pre-allocated in the main memory
to support the internal graphics device |
| Integrated
Storage Support |
| Parallel
ATA |
Single-channel
ATA 100 supporting up to two IDE devices |
| Serial
ATA |
Four
SATA 150 connectors, RAID 0, 1, and 10 supported
for SATA disks |
| Input/Output |
| PCI |
Four
independent PCI bus segments with an IntelŪ
Adaptive Slot2 to provide adapter
support for PCI Express* x8, PCI-X 100MHz, and
PCI 32-bit/33MHz; the PCI 32-bit/33MHz bus segment
is directed through the ICH6R; the PCI-X and
PCI bus segments are independently connected
via the PXH, which is routed through the ICH6R
using a PCI Express x4 interface; the PCI Express
x8 bus is provided directly through the MCH |
| IDE |
Single-channel
EIDE for a total of two legacy IDE devices;
four SATA channels for a total of four SATA
disks with Zero Channel RAID capability, supporting
RAID 0, 1, and 10 |
| USB |
Two
external USB headers (back) and one internal
USB header for one additional USB port. |
| Serial
Ports |
Two
asynchronous RS-232C serial ports; one external
9-pin connector, one internal 9-pin header |
| Floppy
Controller |
1.44
MB and 2.88 MB, 3-mode support |
| Keyboard/Mouse |
Two
PS/2 ports, 8240A-compatible |
| IntelŪ
Server Management |
| Integrated
Management Type |
Onboard
Platform Instrumentation |
| Software
Support |
IntelŪ Server Management family of software |
| Supported
Standards |
IPMI
1.5 |
| Fully
Validated Operating Systems |
Microsoft
Windows Server* 2003 Enterprise Edition, Microsoft
Windows XP, Red Hat* Linux* Enterprise 3.0,
and SUSE* LINUX* Enterprise Server 9 |
| System
BIOS |
| Type |
8Mb
Flash EEPROM with AMI* BIOS, Multiboot BBS (BIOS
Boot Specification) 1.4 compliant |
| Special
Features |
Flashable,
setup utility available, Plug and Play, IDE
drive autoconfigure, SMBIOS 2.3, ECC/Parity
support, multilingual support, enabled for rolling/online
BIOS updates |
| Configuration
Utilities |
Server
Configuration Wizard for system setup of initial
Intel Server Management configuration |
| Jumpers |
CMOS
clear, password clear, BIOS recovery, BMC boot
block write protect |
| Front
Panel Connectors |
Power
LED, hard-drive activity LED, system-fault LED,
power/sleep switch, network connection LED,
reset switch, NMI switch |
| Mechanical |
| Board
Style |
ATX |
| Board
Size |
12"
x 9.6" (305 mm x 244 mm) |
| Power
Requirements |
| +5V |
20A
maximum continuous current |
| +5V
Standby |
2A
minimum continuous current |
| +12V |
43A
maximum continuous current |
| +3.3V |
24A
maximum continuous current |
| -5V |
0.3A
maximum continuous current |
| -12V |
20A
maximum continuous current |
| Environment |
| Ambient
Temperature |
Operating
(system): 10°C to 35°C; non-operating/storage
(system): -40°C to +70°C ambient |
| Relative
Humidity |
Non-operating:
95%, non-condensing at 30°C |
| Safety
and EMC Regulatory Compliance (Class A) |
EMC
Regulatory Compliance is based on a board configured
in an Intel host system in which Intel tested
the board and found it compliant. |
| Country
or District |
Certification
Safety
and/or EMC |
Regulatory
Mark Safety
and/or EMC |
| Australia
and New Zealand |
ACA,
MED |
C-Tick |
| Canada |
UL
/ Industry Canada |
cURus
/ ICES |
| Europe |
European
Directives |
CE |
| International |
CB
Report / CISPR |
Not
Applicable |
| Japan |
VCCI
(Verification only) |
Not
Applicable |
| Korea |
RRL |
MIC |
| Russia |
GOST |
GOST |
| Taiwan |
BSMI
DOC |
BSMI |
| United
States |
UL
/ FCC (Verification only) |
cURus |
| Additional
IntelŪ Entry Server Platform SR1425BK1-E Specifications |
| Dimensions |
1U:
Height 1.70", Width 16.93", Depth 26.46" (43.3
mm x 430 mm x 672 mm) |
| Power |
300W
PFC |
| Cooling |
Five
system fans to provide cooling for processor,
hard drives, and add-in cards monitored by the
internal hardware monitor; two power supply
fans |
