Photos

Introduction

An industry first, the Hitachi Deskstar® 7K1000 hard disk drive delivers up to one terabyte of storage capacity for demanding consumer and commercial computing products. It leverages the industry’s most reliable perpendicular magnetic recording (PMR) techniques and the latest advancements in silent acoustics, shock protection, and head technology to maximize capacity, performance and field reliability. Best-in-class power management and thermal emissions help manufacturers meet energy compliance targets and extend drive life.

Proven PMR technology
Field-proven in 2.5-in. drives, Hitachi’s PMR implementation continues to demonstrate reliability equal to or exceeding conventional longitudinal technology. The Deskstar 7K1000’s second-generation PMR head and media technology improves noise characteristics and thermal stability.

Reduced power idle modes
Unique to Hitachi drives, the Deskstar 7K1000 features three advanced low-power idle modes – active, unload and low-power. Together, they reduce power consumption at the drive level up to 20%, optimize non-operational latency and lower drive temperature for cooler system operation.

Outstanding shock resistance and power efficiency
Through a patented ramp load/unload design disk heads (in non-operating modes) are unloaded to a ramp outside the disk where they rest in a low-power ‘unload idle’ state until activated. In low RPM drives, this can reduce power by up to 50%. Ramp load/ unload provides tangible benefits for the drive and host product. It greatly minimizes the risk of shock damage by eliminating direct contact between the heads and disks. Reduced wear and heat improve overall drive reliability. In the event of power loss to the drive, heads are unloaded using energy extracted from the spinning disks. This patented power saving feature helps to reduce overall maintenance costs and extends the drive service life. Another contributor to Deskstar 7K1000’s exceptional shock performance and power savings is the use of compact, low-mass femto air-bearing sliders.

Extended field reliability
An integrated thermal sensor monitors operating temperature, enabling the host processor to intelligently adjust airflow as needed for cooling. Sensor integration reduces component cost and increases reliability. Deskstar 7K1000’s thermal fly-height control (TFC) uses an integrated heating element to precisely maintain a constant fly-height throughout read and write operations. This reduces raw soft error rate and, in turn, improves overall data integrity, drive performance and reliability. Deskstar 7K1000’s iridium-manganese-chromium (IrMnCr) read head sensor technology offers better performance and reliability in harsh conditions.

Hitachi Design Studios
Located around the world, Hitachi Design Studios assist customers with all aspects of integrating hard drives into consumer electronic devices. Their services focus on drive selection, evaluation and optimization, integration and design-in consulting, software compatibility assessment, performance profiling, problem analysis and reliability consulting.

Hitachi quality and service
All Hitachi hard drives are designed to the highest quality standards with field-proven components. They are backed by Hitachi’s worldwide technical support and integration services, enabling global customers to bring their products to market quickly.

Model

Features

• Storage capacities up to 1 TB
  
• Perpendicular magnetic recording technology
  
• SATA 3.0 Gb/s interface
  
• Ramp load design increases shock protection and power savings
  
• Thermal monitoring and fly height control enhance reliability
  
• Three low-power idle modes boost power efficiency
  
• Silent seek acoustics achieve ultra-quiet operation
  
• Host/drive authentication for hardware security
  
• Internal and external storage for consumer computers
  
• Networked storage servers
  
• Extreme gaming machines
  
• Video editing arrays

Specifications

• Capacity: 1 TB
  
• Rotational Speed: 7200 rpm
  
• Cache: 32 MB
  
• Interface: SATA 300
  
• Max. External Transfer Rate: 300 MB/s
  
• Seek Time (typical): Read - 8.5ms; Write - 9.2ms
  
• Silent-Seek Time (typical): Read - 14ms; Write - 15ms
  
• Shock:
  - Operating: 70G @ 2ms
  - Non-operating: 300G @ 1ms
• Dimensions (WxLxH): 101.6 x 147 x 26.1 mm
  
• Weight: 700 g
  
• RoHS Compliant