|
Introduction
ATX 2.01 | EPS12V
Quad 12V Rails, ATX 2.01 - EPS 12V 550W Active
PFC, Full Range Input, 80%+ Ultra-High Efficiency,
Energy Saver, 80mm Ball-Bearing Fan, RoHS2006
Lead-Free, Extra-Long Cables up to 42",
20+4Pin, EPS 8-Pin, P4-4 Pin, PCI-Express
6 Pin x 2, Serial-ATA x 4, Molex 4-Pin x 5,
Floppy 4-pin x 1, supports Multi-GPU Graphics,
NVIDIA SLI Certified
Watt: 550
Dimension: 6.75"W x 6.75"L x 7"H
Features
-
Quad 12V Rails Design
- Ultra-High
Efficiency 80%+
- RoHS
2006 Directives (Lead-Free)
- WEEE
Compliance
- Green
Product (G.P) Qualifications
- Extra-Long
Cables (Up to 42")
- NVIDIA
SLI Certified
- Dual
PCI-Express Output
- Low
ripple & noise
- Output
over voltage protection
- Short
circuit protection on all outputs
- On/Off
Power Switch
- Internal
80mm B.B. Fan
- 100%
burn-in under high ambient temperature (50°C)
- MTBF:
100K hours at 25°C
- 100%
Hi-pot tested
- Line
input fuse protection
- Active
PFC (Power Factor Correction)
- Energy-Saver
- Complies
with EN61000-3-2
- AC
input full range
- Supports
Multi-GPU Graphics
Specifications
- Over-voltage
protection: +5V: 5.6V-7.0V, +3.3V: 3.76V-4.8V,
12VDC:13.5V-15.6V
- Over-current
protection: +5V:48A, +3.3V: 60A, +12V1:22A,
+12V2:22A, +12V3:22A, +12V4:22A
- Remote
ON/OFF control: The power supply shall accept
a logic collector level which will disable
/ enable all output voltage (excluding +5V
standby).
- Power
good signal: turn-on delay 100 ms to 500
ms
- Efficiency:
80% Typical load at 115V 83% Typical load
at 230V
- Hold-up
time: 17.0 ms minimum: at 115V / 60 Hz 17.0
ms minimum: at 230V / 50 Hz
- AC
INPUT
- 90-132VAC/
115V
- 180-264VAC/
230V
Photos
|
