-
Port-Based
VLAN supports up to 256 VLAN groups.
-
Built-in
Trunking function supports up to 7 Trunking
groups.
-
24
ports 100/10Mbps support Full-Duplex and
Half-Duplex operation.
-
Port
25,26: 100/10Mbps support Full-Duplex
mode and Half-Duplex mode; 1000Mbps support
Full-Duplex mode.
-
Auto-Negotiation
support for each TP port.
-
Store-and-Forward
technology eliminates bad packets.
-
512KBytes
Buffer Memory.
-
IEEE
802.3x Flow Control support for Full-Duplex
operation.
-
Back-Pressure
flow control support for Half-Duplex operation.
-
6K
MAC address table (max.) quickly pinpoints
destination port for each packet.
-
All
ports support automatic MDI/MDIX cross-over
function for all modes of operation.
-
Supports
by-port Egress/Ingress rate control for
flexible network utilization.
-
Provides
console port for easy configuration.
-
Supports
Sniffer function to monitor ingress, egress,
or port pair traffic.
| Standards |
-
IEEE802.3 10BASE-T
- IEEE802.3u 100BASE-TX
- IEEE802.3ab 1000BASE-T
- IEEE802.3x Flow-Control
|
| Ports |
-
Twenty-four (24) 100BASE-TX
- Two (2) 1000BASE-T Upper ports
|
| Media
Support |
-
10BASE-T: Cat. 3,4 or 5 TP
- 1000BASE-T/100BASE-TX: Cat. 5 TP
|
| Bandwidth |
-
1000BASE-T 2,000/200/20Mbps
- 100BASE-TX 200/100/20/10Mbps |
| Filter/Forward
Rate |
-
1,488,100 packets/second per port @ 1000Mbps
max
- 148,810 packets/second per port @ 100
Mbps max
- 14,881 packets/second per port @ 10Mbps
max. |
| Latency |
-
1.4 µsec @ 1,000Mbps, min.
- 3.0 µsec @ 100Mbps, min.
- 14.5µsec @ 10Mbps min. |
| Mac
Address |
-
Embedded 6K MAC address table, Self-Learning |
| Buffer
Memory |
-
Embedded 512 KBytes packet buffer |
| Duplex
Modes |
-
Auto-Negotiation |
| Crossover |
-
Auto-MDI/MDIX Crossover function for each
port |
| LED
Indicators |
-
One (1) for display PWR status
For port 1 to 24 (100/10Mbps ports):
- One (1) per port for display LINK/ACT
status
- One (1) per port for display FD/COL
status
|
For
port 25, 26 (1000/100/10Mbps ports):
- One (1) per port for display speed 1000Mbps
- One (1) per port for display speed 100Mbos
- One (1) per port for display speed 10Mbps
- One (1) per port for display Full-Duplex
- One (1) per port for display LK/ACT
status |
| Power
Supply |
-
Full range Auto-Switching
- Input voltage:100~240 +/- 10% V AC/50~60
Hz |
| Power
Consumption |
-
36.4 Watt, max. |
| Environment |
-
Operating temp: 0~45° C(32~113°
F)
- Storage temp: -20~70° C(-4~158°
F)
- Humidity: 10%~90% Non-Condensing
|
| Certification |
-
FCC Class A
- CE Mark |
| Dimensions |
-
442x44x185mm (17.4x1.73x7.28 inches) |