CNet CNSH-2400 10/100 Fast Ethernet Switch 24-Port

Home - Network Switches - CNet -> Specifications

PRODUCTS

CNET NETWORK SWITCHES

Product:	CNet CNSH-2400 10/100 Fast Ethernet Switch 24-Port.
Contents:	Retail Box, Network Switch, Rackmount Kit, Manual.
Condition:	Brand New. (We do not participate in the sale of used or refurbished products)
Warranty:	One Year.
DISCONTINUED

CNet CNSH-2400 10/100 Fast Ethernet Switch 24-Port

Introduction

A major advantage of these Switches is each port provides its own bandwidth. Each port also creates an independent network segment. This makes shifting available bandwidths or network segments is as easy as changing a cable. The 10/100Mbps dual speed capabilities make these Switches the perfect Bridge for connecting 10Mbps with 100Mbos segments. Each port is further equipped with a built-in N-Way Auto-Negotiation function that automatically sets the port to operate at that speed. Each Switch provides one (1) or two (2) Crossover ports for Uplinking to a Switch or Hub.

CNet CNSH-2400 10/100 Fast Ethernet Switch 24-Port

All models offer plug-&-play installation with no network configuration required. LEDs are provided on the front panel of each model for real time viewing of Switch and network operations. Fiber ports on the CNSH-2401 and CNSH-2402 can transmit data up to two (2) kilometers.

Features

Twenty-four (24) independent bandwidths and network segments (one per port)
Two (2) or One (1) 100BASE-FX fiber port (CNSH-2402 or CNSH-2401 only)
Auto-Negotiation support for each TP port
Store and Forward technology
6 Mbytes Buffer Memory
Flow control support for Full-Duplex operation (IEEE 802.3X)
Back-pressure support for Half-Duplex operation
1,031 six (6)-byte entries maximum, self learning MAC Address Table
Two (2) Crossover ports for CNSH-2402
10/100Mbps segment Bridging capability
Rackmount kit included

Specifications

SPECIFICATIONS	CNSH-2400	CNSH-2401	CNSH-2402
Standard	- 10BASE-T IEEE 802.3 - 10BASE-TX IEEE 802.3u - IEEE 802.3x Flow Control for Full-Duplex operation
Ports	- Twenty-four (24) 10BASE-T/100BASE-TX	- Twenty-three (23) 10BASE-T/100BASE-TX - One (1) 100BASE-FX	- Twenty-two (22) 10BASE-T/100BASE-TX - Two (2) 100BASE-FX
Media Support	- 10BASE-T Category 3,4 or 5 TP - 100BASE-TX Category 5 TP	- 10BASE-T Category 3,4 or 5 TP - 100BASE-TX Category 5 TP - 100BASE-FX 62.5-125 um multimode fiber cable
Bandwidth	- 100BASE-TX - 200/100Mbps - 10BASE-T - 20/10Mbps	- 100BASE-TX-200/100/20/10Mbps - 100BASE-FX-200/100Mbps - 10BASE-T-20/10Mbps
Forwarding/ Filtering Rate	- 148,800 packets/second per port @ 100Mbps, max - 14,880 packets/second per port @ 100Mbps, max
Latency	- 11 µsec @ 100Mbps, minimum - 75 µsec @ 10Mbps, minimum
MAC Addresses	- 1,031 six (6) - byte entries maximum, self-learning
Buffer Memory	- 6 Mbyte
Duplex Modes	- TP ports have 10/100Mbps Full/Half-Duplex Auto-Negotiation function	- TP ports have 10/100Mbps Full/Half-Duplex Auto-Negotiation - Fiber ports set to Half or Forced Full-Duplex mode via a DIP switch
Crossover	- Port 24 has an extra connector that supports a crossover function	- Port 23 has an extra connector that supports a Crossover function	- Ports 11 & 22 each have an extra connector for Crossover functions
Switches	- One (1) for Power	- One (1) for Power - One (1) to set Fiber port to Half - or - Full Duplex	- One (1) for Power - Two (2) to set Fiber ports to Half - or - Full Duplex
LED Indicators	- One (1) for Power - One (1) per port for Link / ACT - One (1) per port for Full-Duplex / Collision
Power Supply	- Internal full range auto-switching - Input voltage: 100 ~ 240 +/-10% VAC/ 50 ~ 60 Hz
Power Consumption	- 36.4 watt max.
Environment	- Operating Temp: 0 ~ 45 C (32 ~ 113 F) - Storage Temp : -20 ~ 70 C (-4 ~ 158 F) - Humidity : 10% ~ 90% non condensing
Dimensions	- 442 * 185 * 44mm (17.40 * 7.28 * 1.73 inches)