|
Photos
Introduction
Cisco
870 Series of integrated services routers
are fixed-configuration routers that support
multiple types of DSL technologies, broadband
cable, and Metro Ethernet connections in small
offices. They provide the performance needed
to run concurrent services, including firewall,
intrusion prevention, and encryption for VPNs;
optional 802.11b/g for WLAN networking; and
quality of service (QoS) features for optimizing
voice and video applications. In addition,
the Cisco Router and Security Device Manager
(SDM) Web-based configuration tool simplifies
setup and deployment, and centralized management
capabilities give network managers visibility
and control of the network configurations
at the remote site.
Specifications
| Product
Identifiers |
| Cisco
Part Number: |
CISCO877-K9
|
| Cisco
UPC: |
0746320958040
|
| General |
| Device
Type |
Router
|
| Form
Factor |
External
|
| Width |
10.2
in |
| Depth |
8.5
in |
| Height |
2
in |
| Weight |
2.1
lbs |
| Memory |
| RAM |
128
MB (installed) / 256 MB (max) |
| Flash
Memory |
24
MB (installed) / 52 MB (max) |
| Networking |
| Connectivity
Technology |
Wired
|
| Integrated
Switch |
4-port
switch |
| Framing
Format |
ANSI
T1.413 |
| Data
Link Protocol |
Ethernet,
Fast Ethernet |
| Switching
Protocol |
Ethernet
|
| Network
/ Transport Protocol |
PPTP,
L2TP, IPSec, PPPoE, PPPoA |
| Routing
Protocol |
RIP-1,
RIP-2, HSRP, VRRP, GRE |
| Remote
Management Protocol |
SNMP,
Telnet, HTTP, HTTPS |
| Capacity |
VPN
tunnels : 10 |
| Status
Indicators |
Port
status, power |
| Features |
Firewall
protection, DMZ port, auto-sensing per
device, dynamic IP address assignment
, DHCP support, NAT support, hardware
encryption, VPN support, PAT support,
auto-negotiation, VLAN support, auto-uplink
(auto MDI/MDI-X), Stateful Packet Inspection
(SPI), dynamic DNS server, manageable,
IPv6 support, VPN passthrough, Intrusion
Prevention System (IPS), Low-latency queuing
(LLQ), Class-Based Weighted Fair Queuing
(CBWFQ), Weighted Fair Queuing (WFQ),
Access Control List (ACL) support, Quality
of Service (QoS) |
| Compliant
Standards |
IEEE
802.1D, IEEE 802.1x |
| Communications |
| Type |
DSL
modem |
| Digital
Signaling Protocol |
ADSL,
ADSL2, ADSL2+ |
| Protocols
& Specifications |
ITU
G.992.1 (G.DMT), ITU G.992.3 (G.DMT.bis),
ITU G.992.5 |
| Expansion
/ Connectivity |
| Interfaces |
4
x network - Ethernet 10Base-T/100Base-TX
- RJ-45 1 x modem - ADSL - RJ-45 ( WAN
) 1 x management - console - RJ-45 |
| Miscellaneous |
| Encryption
Algorithm |
Triple
DES, AES |
| Authentication
Method |
RADIUS,
TACACS+ |
| Compliant
Standards |
FCC
Class B certified, ETSI, EN 60950, IEC
61000-3-2, IEC 61000-4-11, IEC 61000-4-2,
IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-6, IEC 61000-4-8, IEC950,
VCCI-II, EN55022 Class B, ICES-003 Class
B, AS/NZ 3548 Class B, ACA TS001, AS/NZS
3260, FCC Part 68, CS-03, UL 1950 Third
Edition |
| Power |
| Power
Device |
Power
adapter - external |
| Voltage
Required |
AC
120/230 V ( 50/60 Hz ) |
| Power
Provided |
26
Watt |
| Software
/ System Requirements |
| OS
Provided |
Cisco
IOS Advanced Security |
| Environmental
Parameters |
| Min
Operating Temperature |
32
°F |
| Max
Operating Temperature |
104
°F |
| Humidity
Range Operating |
10
- 85% |
|
