|
Introduction
The
Cisco EtherSwitch Network Module (NM) has
sixteen 10/100 switched Ethernet ports, with
options for in-line power and a single Gigabit
Ethernet port. The 16-port Cisco EtherSwitch
NM is a modular, high-density network module
that provides line-rate Layer 2 switching
across Ethernet ports using Cisco IOS Catalyst
Software. Expected features such as port autosensing,
QoS and VLAN support from 802.1P and 802.1Q
standards, and 802.1D Spanning Tree protocols
are standard on the EtherSwitch module. The
Cisco EtherSwitch Network Module is available
in a 16-port 10/100BaseTX switch module and
a 16-port 10/100BaseTX switch with an in-line
power daughter-card module. The in-line power
Cisco EtherSwitch NM can power Cisco IP phones
or Cisco wireless access points. In-line power
requires an external power supply. Each of
these two network modules can accept a single-port
Gigabit Ethernet daughter card.
Specifications
- Remote
Management Protocol: SNMP
- Features
Full duplex capability, layer 2 switching,
auto-sensing per device, manageable
- Compliant
Standards: IEEE 802.3, IEEE 802.3U, IEEE
802.1D, IEEE 802.1Q, IEEE 802.1p
- System
Requirements: Cisco IOS
- Device
Type: Switch
- Form
Factor: Plug-in module
- Dimensions:
(WxDxH) 7.1 in x 7.2 in x 1.5 in
- Weight:
2 lbs
- RAM:
32 MB
- Ports:
Qty 16
- Data
Transfer Rate: 100 Mbps
- Data
Link Protocol: Ethernet, Fast Ethernet
Photos
|
