|
Photos
Features
Extremely
Quiet by Patented Fan Casing
The low speed 92 mm fan reduces the noise
level to a minimum.
The patented fan holder is able to practically
eliminate the typical buzzing sound of 92
mm fans.
The
PWM chip in the motor allows an exact fan
speed control via BIOS. (4 wire)
Powerful
cooling
6 Heat Pipes (three used double sided) are
able to transfer heat up to 200 Watt. The
heat exchanger is built of 42 fins and consists
of a surface area of over 4700 cm2 and allows
for resistance free energy transfer to air.
Integrated
Cooling of Voltage Converters
Air is drawn in from the side of the fan to
cool the components around the CPU.
Some air is blown out towards the voltage
converters on the mainboard with the
bent fins at the bottom.
Patented
Vibration Absorption
The four rubber connectors on the fan
case act as a vibration damper to absorb the
vibration of the running fan and prevent vibration
transfer to the heatsink and the case.
Easy
Installation
The cooler is to install without any tools
within seconds.
Long
Lifetime / 6 Years Warranty
The ARCTIC Ceramic Bearing provides an unmatched
Life Time of 137'000h (L10@40°C) resp.
an MTBF@70°C of 163'000h and thus a 6
year warranty.
Thermal
Compound
We ship our coolers with our latest ARCTIC
MX-2 thermal compound pre-applied. MX-2 is
a high thermal conductivity and low thermal
resistance compound that optimizes thermal
dissipation. It is ideally suited for use
in CPU and GPU cooling where thermal conductivity
is a major factor.
Specifications
- Application:
- All
AMD Sempron, Athlon 64, Athlon 64 X2
and Athlon 64 FX (Socket 754, 939, AM2)
- All
AMD Opteron
- Heat
Sink: 104 x 58 x 126.5 mm
- Fan:
107 x 43.5 x 96 mm
- Overall
Dimensions: 107 x 96.5 x 126.5 mm
- Rated
Fan Speed: 900-2200 RPM (PWM)
- Power
Consumption: 0.16 Amp.
- Air
Flow: 40 CFM / 68 m3/h
- Weight:
528 g
- Noise
Level: 0.8 Sone
- Thermal
Resistance: 0.18°C/Watt
- Thermal
Interface Material: Pre-applied MX-1 Paste
- Warranty:
6 Years
|
