|
Photos
Introduction
EarthWatts,
the most environmentally friendly Power Supply yet.
Do
your part for the environment with EarthWatts power
supplies. The earth is our most valuable resource
and protecting and preserving it for future generations
is of utmost importance. EarthWatts is available
in three highly efficient models—380 Watt,
430 Watt, and 500 Watt—and are all 80 PLUS®
certified, the newest standard in power supply efficiency.
And that means that using EarthWatts will save you
money on your electrical bill. Fully equipped with
universal input, EarthWatts automatically works
on any power grid in the world. And the built-in
Active PFC makes EarthWatts the ideal way to reduce
electrical waste and protect the environment.
Features
-
80mm low noise cooling fan
- Dual
12V outputs: 12V2 for Motherboard and peripherals;
12V1 for processor
- Industrial-grade
protection circuitry prevents damage resulting
from short circuits, power overloads, over voltage,
and under voltage
- 80
PLUS® certified
- 4
SATA connectors
- PCI-E
connector: one for 380W and 430W, two for 500W
- Safety
approvals: UL, CUL, FCC, TÜV, CE, CB, C-tick,
CCC
- Universal
input
- Active
Power Factor Correction (PFC)
- PF
value up to 99%
- AQ3
Antec Quality three-year parts and labor warranty
Specifications
|
FEATURES
|
|
Maximum Power |
430
Watts
|
|
Switches |
ATX Logic on-off
additional power rocker switch
115/230 Volt selector switch |
|
Special Connectors |
ATX12V
3-pin Fan Sensor
SATA |
|
Transient Response |
+5V, +12V and 3.3V outputs return to within
5% in less than 1ms for 20% load change.
|
|
P. G. Signal |
100-500ms |
Over Voltage Protection
recycle AC to reset |
+5V trip point < +6.5V
+3.3V trip point < +4.1V
+12V trip point < +14.4V |
|
Leakage Current |
<
3.5mA @ 115VAC |
|
DIMENSIONS
|
|
Unit Size |
5.9"(W) x 3.4"(H) x 6.1"(D)
14.9cm (W)x 8.5cm (H) x 15.8cm (D) |
|
Net Weight |
5lbs.; 2.3kg |
|
INPUT |
|
Input Voltage |
115 VAC / 230VAC |
|
Input Frequency Range |
60Hz/50Hz |
|
Input Surge Current |
<
60A @ 115VAC / < 80A @ 230V |
|
Input Current |
10.0A for 115VAC
5.0A for 230VAC |
|
Hold-up Time |
>
17ms at Full Load |
|
Efficiency |
up
to 85% |
|
EMI/RFI |
FCC Class B |
| OUTPUT |
|
+3.3V |
+5V |
+12V1 |
+12V2 |
+5V SB |
-12V |
| Max.
Load |
20A |
20A |
17A |
16A |
2.5A |
0.8A |
|
Min. Load |
0.5A |
0.5A |
1A |
1A |
0A |
0A |
|
Load Reg. |
±3% |
±3% |
±3% |
±3% |
±5% |
±5% |
|
Ripple V(p-p) |
50mV |
50mV |
120mV |
120mV |
50mV |
120mV |
* Total: +12V output: 30A
* +5V and +3.3V combined output: 32.8A
|
|
ENVIRONMENTAL |
| Operating
Temp. |
10
to 50°C |
|
Operating Alt. |
Sea Level 10,000 ft. |
|
Non-Operating Vibration |
Operating: 10-300 Hz, 0.5G, 3 axes, 1
hr. ea. axis
Non-operating: 10-300 Hz, 2.0G, 3 axes,
1 hr. ea. axis |
|
MTBF |
80,000 hrs. @ 25°C |
|
Approvals |
UL, TUV, CB, FCC CLASS B, CUL, C-Tick,
CCC |
|
|
|
