|
Introduction
The
new generation of power supplies has arrived with
Antec’s TruePower Trio series. The three +12V
rails allow you to distribute your power more evenly,
which will result in a more stable system. Available
in three models: 430 Watt, 550 Watt and a 650 Watt
that gives you serious power for even the most cutting
edge components. TruePower Trio perfectly handles
dual processors, dual graphics cards, and just about
anything else you can throw at it.
Features
-
Universal Input, automatically adjusts for 100V
to 240V power grids
- Active
Power Factor Correction (PFC) for environmentally
friendlier power
- Three
12V output circuits provide added system stability
- Accurate
power rating allows TruePower Trio to deliver
its full rated power, 24 hours a day rated at
50ºC
- Up
to 85% efficiency
- 120mm
low noise cooling fan
- Fan
Only power connectors allow TruePower Trio to
control case fan speeds, reducing total system
noise
- Dedicated
outputs for stable output and less ripple noise
- Feedback
loop circuits for tighter load regulation (±3%)
to maintain accurate voltage to all components
- Heavy
duty protection circuitry prevents damage resulting
from short circuits (SCP), power overloads (OPP),
over voltages (OVP), and under voltages (UVP)
- 4
SATA connectors for Serial ATA drives
- Two
PCI-E connectors for PCI-Express video cards on
550W and 650W models, one connector on 430W model
- MTBF:
80,000 hours at 50°C
- Safety
approvals: UL, CUL, FCC, TÜV, CE, C-tick,
CCC, CB
- Power
Factor value up to 99%
- Gold
plated connectors for superior conductivity
- AQ5
- 5 year warranty
Specifications
|
FEATURES
|
|
Maximum Power |
430 Watts |
|
Switches |
ATX Logic on-off
additional power rocker switch |
|
Special Connectors |
ATX12V
3-pin
Fan Sensor
Fan
Only
SATA |
|
Transient Response |
+5V,+12V and 3.3V outputs return to within 3%
in less than 1ms for 20% load change. |
|
P. G. Signal |
100-500ms |
Over Voltage Protection
recycle AC to reset |
+5V trip point < +6.5V
+3.3V trip point < +4.1V
+12V trip point < +14.4V |
|
Leakage Current |
<
3.5mA @ 115VAC |
|
DIMENSIONS
|
|
Unit Size |
5.9" (W) x 3.4" (H) x 5.5" (D)
14.9cm (W) x 8.5cm (H) x 14cm (D) |
|
Net Weight |
5lbs.; 2.3kg |
|
INPUT |
|
Input Voltage |
115 VAC / 230VAC |
|
Input Frequency Range |
47Hz to 63Hz |
|
Input Surge Current |
<
60A @ 115VAC |
|
Input Current |
7A for 115VAC
3.5A for 230VAC |
|
Hold-up Time |
>
17ms at Full Load |
|
Efficiency |
up to 85% |
|
EMI/RFI |
FCC Class B
CISPR22 Class |
| OUTPUT |
|
+3.3V |
+5V |
+12V1 |
+12V2 |
+12V3 |
+5V SB |
-12V |
| Max.
Load |
22A* |
15A* |
16A* |
16A |
16A |
3.0A |
0.8A |
|
Min. Load |
0.5A |
0.5A |
1A |
1A |
1A
|
0A |
0A |
|
Load Reg. |
±3%
|
±3%
|
±3%
|
±3%
|
±3% |
±3%
|
±6%
|
|
Ripple V(p-p) |
50mV |
50mV |
120mV |
120mV |
120mV |
50mV |
120mV |
|
* +12V1, 12V2,12V3 maximum output 384 Watts
max. |
|
ENVIRONMENTAL |
| Operating
Temp. |
0
to 50? |
|
Operating Alt. |
Sea Level 10,000 ft. |
|
Non-Operating Vibration |
Operating:
10-300 Hz, 0.5G, 3 axes, 1 hr. ea. axis
Non-operating: 10-300 Hz, 2.0G,
3 axes, 1 hr. ea. axis |
|
MTBF |
80,000 hrs. @ 25 ? |
|
Approvals |
UL, CUL, FCC Class B, CB, TÜV |
Photos
|
