|
Photos
Introduction
PCI
Express to Serial ATA II Hardware RAID Controllers
Featuring Red Hot RAID 6
AMCC's
3ware 9650SE SATA II hardware RAID controllers deliver
industry-leading RAID 6 and RAID 5 performance,
robust fault tolerance, and multi-terabyte capacities.
A PCI Express host interface, Multi-lane™ connectivity,
StorSwitch™ architecture and sophisticated
SATA II features drive this unrivaled performance.
The
Best Keeps Getting Better
The 3ware 9650SE PCI Express to SATA II RAID controller
pushes AMCC's established leadership in RAID controller
performance to new heights. While 3ware controllers
continue to lead the market in RAID 5 performance,
the 3ware 9650SE outshines the competition as the
new standard bearer for RAID 6 performance, delivering
over 800MB/s RAID 6 reads and 600MB/s RAID 6 writes.
Red
Hot RAID 6
3ware's parallel XOR RAID 6 parity generation algorithm
maximizes RAID 6 throughput, so that RAID 6 enabled
9650SE controllers deliver unequaled RAID 6 performance.
Features
-
8th-generation StorSwitch™ non-blocking switched
architecture.
- On-board
I/O RISC processor and RAID offload provides true
hardware RAID.
- SCSI
device driver model to take advantage of the benefits
of SCSI using inexpensive Serial ATA drives .
- Bootable
array support for greater fault tolerance.
- Variable
stripe size for performance tuning by application.
- 64-bit
LBA support.
- ATA
pass-through mode support.
- Up
to 512MB DDR2 533 memory with ECC protection.
(see table below)
- 32
pooled DMA channels.
- Complete
configuration management suite.
- 3ware BIOS Manager 2 (3BM2) – easy to use
BIOS configuration tool.
- 3ware Disk Manager 2 (3DM®2) – browser-based
management tool.
- Command Line Interface (CLI) – scriptable
configuration tool.
- SNMP
support.
- SMTP
support for email/pager notification.
- ATA/6
and Out of band (OOB) staggered drive spin-up
support.
- Auto
carving allows LUNs > 2TB to be divided into
multiple units for legacy operating systems limited
to 2TB max. per LUN.
- Battery
Backup Unit (BBU) support.
- Multiple
logical unit sizes and RAID levels on one card.
- Multiple
card support within a system for large storage
requirements.
- Hot-swap
and hot-spare support for data availability.
- Dynamic
sector repair for robust data protection.
- S.M.A.R.T.
disk drive monitoring for reliability.
- Emergency
Flash Recovery protects against failed firmware
upgrade.
- Drive
activity LED support.
- Online
Capacity Expansion and RAID Level Migration.
- Enhanced
data protection with write journaling for non-redundant
arrays and accidental drive removal.
- Drive
insertion and removal notification.
- Array/Drive
Status and drive identification LED support. (requires
3ware Chassis Control Unit-enabled backplane)
- Chassis
Control Unit for enclosure management via I2C.
Specifications
| Model |
9650SE-2LP |
9650SE-4LPML |
9650SE-8LPML |
| Form
Factor |
Low Profile |
Low
Profile |
Low
Profile |
| Port
Count |
2 |
4 |
8 |
| PCI
Express Lanes |
1 |
4 |
4
|
| Raid
Levels |
0,1,
Single Disk,JBOD |
0,1,5,10,Single
Disk,JBOD |
0,1,5,6,10,50,Single
Disk,JBOD |
| Onboard
Memory |
128
MB DDR2 533 |
256
MB DDR2 533 |
256
MB DDR2 533 |
| Connector
Type |
Discrete |
Multi-lane |
Multi-lane |
| BBU
Support |
No |
Yes |
Yes |
| Model |
9650SE-12ML |
9650SE-16ML |
9650SE-24M8 |
| Form
Factor |
Full
Height |
Full
Height |
Full
Height |
| Port
Count |
12 |
16 |
24 |
| PCI
Express Lanes |
8 |
8 |
8 |
| Raid
Levels |
0,1,5,6,10,50
Single Disk,JBOD |
0,1,5,6,10,50,Single
Disk,JBOD |
0,1,5,6,10,50,Single
Disk,JBOD |
| Onboard
Memory |
256
MB DDR2 533 |
256
MB DDR2 533 |
512
MB DDR2 533 |
| Connector
Type |
Multi-lane |
Multi-lane |
Multi-lane |
| BBU
Support |
Yes |
Yes |
Yes |
*
All models are RoHS Compliant
Operating
System Support
- Microsoft®
Windows® 2003/XP/2000, Red Hat Linux, SuSE
Linux, Fedora Linux, 2.4 Linux kernel, 2.6 Linux
kernel, FreeBSD; 32/64-bit driver support for
Windows, Linux and FreeBSD
|
